A concerted international project to establish high-temperature fixed points for primary thermometry

Research into high-temperature fixed points above 1,100 degrees C has made significant progress since they were first reported in 1999. In particular, it has been established that single cells are repeatable at the sub-50 mK level, and intra-cell reproducibility at the 100 mK level has been demonstrated even at temperatures as high as 2,500 degrees C. The fixed points have been used to compare temperature and radiometry scales over a wide temperature range, and are being developed and established as secondary references for thermocouple calibrations. However, before they can be fully accepted as primary temperature references, much work remains to be done, namely: (1) Establishment of long-term stability of the fixed-point temperature; (2) Development of robust procedures for the reliable construction of the fixed-point cells (to ensure routine intra-cell reproducibility of 100 mK); (3) Demonstration of long-term robustness of the fixed-point cells; (4) Assignment of thermodynamic temperatures to a selected set of fixed points; (5) Agreement and acceptance of these temperature values by the CCT; (6) Agreed methods on how to take full utility of these new fixed points into any future International Temperature Scale (ITS)-or the current ITS-90 via an addendum to the mise en pratique for the definition of the kelvin. To ensure that this work progresses to completion in a reasonable time frame, a research project, under the auspices of the CCT-WG5, has been formulated and is currently in progress with the aim of achieving the above mentioned targets by 2012. This article will describe this project and detail partner contributions.