Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization

被引:419
作者
Halloran, John W. [1 ]
机构
[1] Univ Michigan, Dept Mat Sci & Engn, Ann Arbor, MI 48109 USA
来源
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 | 2016年 / 46卷
关键词
photopolymerization; stereolithography; BINDER REMOVAL; FABRICATION; BEHAVIOR; ISSUES;
D O I
10.1146/annurev-matsci-070115-031841
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Ceramic stereolithography and related additive manufacturing methods involving photopolymerization of ceramic powder suspensions are reviewed in terms of the capabilities of current devices. The practical fundamentals of the cure depth, cure width, and cure profile are related to the optical properties of the monomer, ceramic, and photo-active components. Postpolymerization steps, including harvesting and cleaning the objects, binder burnout, and sintering, are discussed and compared with conventional methods. The prospects for practical manufacturing are discussed.
引用
收藏
页码:19 / 40
页数:22
相关论文
共 56 条
[1]   Fabrication of ceramic component using constrained surface Microstereolithography [J].
Adake, Chandrashekhar V. ;
Gandhi, Prasanna ;
Bhargava, Parag .
INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 :355-361
[2]   Integrally Cored Ceramic Mold Fabricated by Ceramic Stereolithography [J].
Bae, Chang-Jun ;
Halloran, John W. .
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2011, 8 (06) :1255-1262
[3]   Influence of Residual Monomer on Cracking in Ceramics Fabricated by Stereolithography [J].
Bae, Chang-Jun ;
Halloran, John W. .
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2011, 8 (06) :1289-1295
[4]   Microfabrication of ceramic components by microstereolithography [J].
Bertsch, A ;
Jiguet, S ;
Renaud, P .
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2004, 14 (02) :197-203
[5]   Design and fabrication of a novel porous implant with pre-set channels based on ceramic stereolithography for vascular implantation [J].
Bian, Weiguo ;
Li, Dichen ;
Lian, Qin ;
Zhang, Weijie ;
Zhu, Linzhong ;
Li, Xiang ;
Jin, Zhongmin .
BIOFABRICATION, 2011, 3 (03)
[6]  
Bose S., 2015, Additive Manufacturing, P143, DOI [10.1201/b18893-6, DOI 10.1201/B18893-6]
[7]  
Brady G. A., 1998, NAV RES REV, V50, P39
[8]  
Brady GA, 1996, SOL FREEFORM FABRIC, P403
[9]   Integration of Single-Mode Photonic Crystal Clad Waveguides With Monolithically Constructed Ceramic Subsystems [J].
Brakora, Karl F. ;
Sarabandi, Kamal .
IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, 2009, 8 :433-436
[10]   Stereolithography process: Influence of the rheology of silica suspensions and of the medium on polymerization kinetics - Cured depth and width [J].
Chartier, T. ;
Badev, A. ;
Abouliatim, Y. ;
Lebaudy, P. ;
Lecamp, L. .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (08) :1625-1634