Stress Rupture Life Prediction Method for Notched Specimens Based on Minimum Average Von Mises Equivalent Stress

被引:5
作者
Ji, Dawei [1 ,2 ]
Hu, Xianming [1 ,2 ]
Zhao, Zuopeng [1 ,2 ]
Jia, Xu [1 ,2 ]
Hu, Xuteng [1 ,2 ]
Song, Yingdong [1 ,2 ,3 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, Coll Energy & Power Engn, Nanjing 210016, Peoples R China
[2] Nanjing Univ Aeronaut & Astronaut, Key Lab Aero Engine Thermal Environm & Thermal St, Minist Ind & Informat Technol, Nanjing 210016, Peoples R China
[3] Nanjing Univ Aeronaut & Astronaut, State Key Lab Mech & Control Mech Struct, Nanjing 210016, Peoples R China
关键词
nickel-based superalloy; creep rupture; life prediction; notched specimens; average Von Mises equivalent stress; CREEP LIFING METHODOLOGIES; ALLOY; REDISTRIBUTION; DUCTILITY; FRACTURE; GROWTH; STEEL;
D O I
10.3390/met12010068
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Creep tests were carried out on notched plate specimens of nickel-based superalloy GH4169 with different stress concentration coefficients. It was found that the duration of the first stage of the creep curve increases with the increase of stress concentration coefficient, while the fracture ductility decreases with the increase of stress concentration coefficient. To predict the life of notched plate specimens, four constitutive models were used to analyze the stress and strain of the notches. It was found that the average Von Mises equivalent stress (AVES) on the minimum notch section first decreases and then increases with the creep time, resulting in a minimum value. The minimum average Von Mises equivalent stress (MAVES) is considered as the characteristic stress of notched specimens in this paper. The creep life equation is fitted according to the results of creep tests of smooth specimens, and then the predicted life of notched specimens is obtained by substituting the minimum average Von Mises equivalent stress of notched specimens into the creep equation. The prediction results of the four constitutive models are within 2 times the dispersion band, and the three-stage model is within the 1.5 times dispersion band.
引用
收藏
页数:15
相关论文
共 32 条
[1]   Advances in the Wilshire extrapolation technique-Full creep curve representation for the aerospace alloy Titanium 834 [J].
Abdallah, Z. ;
Perkins, K. ;
Williams, S. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 550 :176-182
[2]   A Critical Analysis of the Conventionally Employed Creep Lifing Methods [J].
Abdallah, Zakaria ;
Gray, Veronica ;
Whittaker, Mark ;
Perkins, Karen .
MATERIALS, 2014, 7 (05) :3371-3398
[3]   STEADY-STATE STRESS DISTRIBUTIONS IN CIRCUMFERENTIALLY NOTCHED BARS SUBJECTED TO CREEP [J].
ALFADDAGH, KD ;
FENNER, RT ;
WEBSTER, GA .
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 1982, 17 (03) :123-132
[4]  
[Anonymous], 1952, T AM SOC MECH ENG
[5]   INTERGRANULAR FRACTURE DURING POWER-LAW CREEP UNDER MULTIAXIAL STRESSES [J].
COCKS, ACF ;
ASHBY, MF .
METAL SCIENCE, 1980, 14 (8-9) :395-402
[6]  
Dobes F., 1976, Metal Science, V10, P382
[7]   A NUMERICAL STUDY OF PARAMETERS CONTROLLING STRESS REDISTRIBUTION IN CIRCULAR NOTCHED SPECIMENS DURING CREEP [J].
EGGELER, G ;
WIESNER, C .
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 1993, 28 (01) :13-22
[8]   Method for improving parametric creep rupture life of 2•25Cr-1Mo steel using artificial neural networks [J].
Evans, M .
MATERIALS SCIENCE AND TECHNOLOGY, 1999, 15 (06) :647-658
[9]  
Evans R.W., 1981, CREEP FRACTURE ENG M, P303
[10]   The θ projection method applied to small strain creep of commercial aluminium alloy [J].
Evans, RW ;
Scharning, PJ .
MATERIALS SCIENCE AND TECHNOLOGY, 2001, 17 (05) :487-493