Morphology and photophysical properties of luminescent electrospun fibers prepared from diblock and triblock polyfluorene-block-Poly(2-vinylpyridine)/PEO blends

We successfully prepared luminescent electrospun (ES) fibers from the polymer blends of diblock poly[2,7-(9,9-dihexylfluorene)]-block-poly(2-vinylpyridine)(di-PFPVP) or triblock P2VP-b-PF-b-P2VP (tri-PFPVP) with polyethylene oxide (PEO) using a single-capillary spinneret. The morphology and photophysical properties of ES fibers were explored via the molecular architecture, solvent selectivity, and different molecular weights of PEO. The ES fibers had diameters around 400-800 nm using solvent of methanol (MeOH)/H(2)O while those using CHCl(3) were around 1-3 mu m, which was probably due to the difference on the solvent dielectric constant. Furthermore, the PF aggregated size and emission peak maximum in the ES fibers increased with enhancing the block copolymer composition using CHCl(3). However, an insignificant variation was observed using MeOH/H(2)O. The larger PF aggregated size of the di-PFPVP/PEO blend ES fibers resulted in the red-shifting and broader emission peak, in comparison with that of the tri-PFPVP/PEO blend ES fibers. The efficient interaction of the PEO with the PVP block in two different block copolymers accounted for the above results. In the ES fibers using the low molecular weight of PEO (Mn similar to 100 K), it exhibited a red-shifting on the PL spectra in comparison with the spin-coated films due to the geometrical confinement. Nevertheless, such confinement was probably significantly reduced using the high molecular weight PEO (Mn similar to 2000 K) and thus an insignificant variation was found on the PL spectra. The present study demonstrated that their aggregate morphology and photophysical properties of ES fibers prepared from conjugated rod-coil block copolymer blends could be significantly tuned through polymer architecture, solvent selectivity, and copolymer composition.