Validated spectrophotometric methods for the estimation of moxifloxacin in bulk and pharmaceutical formulations

New, simple, cost effective, accurate and reproducible UV-spectrophotometric methods were developed and validated for the estimation of moxifloxacin in bulk and pharmaceutical formulations. Moxifloxacin was estimated at 296 nm in 0.1 N hydrochloric acid (pH 1.2) and at 289 nm in phosphate buffer (pH 7.4). Beer's law was obeyed in the concentration range of 1-12 mu g ml(-1) (r(2) = 0.9999) in hydrochloric acid and 1-14 mu g ml(-1) (r(2) = 0.9998) in the phosphate buffer medium. The apparent molar absorptivity and Sandell's sensitivity coefficient were found to be 4.63 x 10(4) l mol(-1) cm-(1) and 9.5 ng cm(-2)/0.001 A in hydrochloric acid; and 4.08 x 104 l mol(-1) cm(-1) and 10.8 ng cm(-2)/0.001 A in phosphate buffer media, respectively indicating the high sensitivity of the proposed methods. These methods were tested and validated for various parameters according to ICH guidelines. The detection and quantitation limits were found to be 0.0402, 0.1217 mu g ml(-1) in hydrochloric acid and 0.0384, 0.1163 mu g ml(-1) in phosphate buffer medium, respectively. The proposed methods were successfully applied for the determination of moxifloxacin in pharmaceutical formulations (tablets, i.v. infusions, eye drops and polymeric nanoparticles). The results demonstrated that the procedure is accurate, precise and reproducible (relative standard deviation <2%), while being simple, cheap and less time consuming and hence can be suitably applied for the estimation of moxifloxacin in different dosage forms and dissolution studies. (C) 2006 Elsevier B.V. All rights reserved.