A compact highly reconfigurable CMOS MMIC directional coupler

This paper presents a tunable CMOS directional coupler that utilizes lumped-element L-C sections. The lumped-element approach used to build the directional coupler makes it possible to integrate the coupler onto a single monolithic microwave integrated circuit (MMIC), as it occupies a small area compared to printed designs. The directional coupler uses varactors and tunable active inductors (TAIs) to synthesize the series and shunt reactances, respectively, which allows extensive electronic control over the coupling coefficient, while insuring a low return loss and a very high isolation. Furthermore, using varactors and TAIs allows the directional coupler to be reconfigured for operation over a wide range of frequencies. Moreover, the symmetric configuration of the coupler allows it to switch from forward to backward operation by simply exchanging the bias voltages applied across the series varactors. The MMIC coupler was fabricated in a standard 0.13-mu m CMOS process and operates from a 1.5-V supply. The circuit occupies 730 mu m x 600 mu m, and is capable of achieving tunable coupling coefficients from 1.4 to 7.1 dB, while maintaining an isolation higher than 41 dB. The MMIC coupler is also capable of operating at any center frequency over the 2.1 - 3.1-GHz frequency range with higher than 40-dB isolation. The coupler achieves a - 4.1-dBm 1-dB compression point while operating from a 1.5-V supply.