Comparison of the fracture and fatigue properties of 16MnR steel weld metal, the HAZ and the base metal

被引：0
作者：
Gao, ZL
Zhang, KD
机构：
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 1997年 / 63卷 / 1-3期
关键词：
fracture; fatigue; weld metal; base metal; HAZ;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The fracture toughness and fatigue crack growth rate of 16MnR steel weld metal, the HAZ and the base metal were measured. The fracture toughness J(1c) of the HAZ is lowest among the weld and base metals and the HAZ, the J(1c) of the base metal being a little higher than that of the HAZ and that of the weld metal being the highest. The crack growth in the HAZ is faster than those in the weld and the base metal, which are nearly the same. Thus both the fracture and fatigue properties in the HAZ are worse than those in both the weld and the base metals.
引用
收藏
页码：559 / 562
页数：4
相关论文
共 50 条
[11]   Cleavage fracture of a high strength steel weld metal [J].
Hughes, RK ;
Ritter, JC .
ADVANCES IN FRACTURE RESEARCH, VOLS 1-6, 1997, :579-586
[12]   Microstructural and fracture analysis of microalloyed steel weld metal [J].
Cvetkovic, R. Prokic ;
Popovic, O. ;
Jovicic, R. ;
Milosevic, N. ;
Burzic, Z. ;
Cvetkovic, I. .
ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY, 2018, 13 :2221-2226
[13]   Effects of alloying elements on the thermal fatigue properties of the ferritic stainless steel weld HAZ [J].
Oh, Daehee ;
Han, Kyutae ;
Hong, Seunggab ;
Lee, Changhee .
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10
[14]   Local properties of undermatched steel weld metal [J].
David A. LaVan ;
W. N. Sharpe .
Metallurgical and Materials Transactions A, 2001, 32 :913-922
[15]   Cleavage fracture criterion of low alloy steel and weld metal in notched specimens [J].
Wang, GZ ;
Chen, JH .
INTERNATIONAL JOURNAL OF FRACTURE, 1998, 89 (03) :269-284
[16]   Effects of degradation on the mechanical properties and fracture toughness of a steel pressure-vessel weld metal [J].
Wu, SJ ;
Knott, JF .
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2003, 80 (11) :807-815
[17]   Improvement mechanism of fatigue strength of weld joints by hammer peening on base metal [J].
Morikage, Yasushi ;
Nakanishi, Katsuyoshi ;
Igi, Satoshi ;
Nakano, Takashi ;
Tomo, Hajime .
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2015, 33 (02) :111-117
[18]   Isothermal and thermomechanical fatigue behaviour of type 316LN austenitic stainless steel base metal and weld joint [J].
Kumar, T. Suresh ;
Yadav, S. D. ;
Nagesha, A. ;
Kannan, R. ;
Reddy, G. V. Prasad .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 772
[19]   Effects of alloying elements on the thermal fatigue properties of the 15 wt% Cr ferritic stainless steel weld HAZ [J].
Oh, Daehee ;
Han, Kyutae ;
Hong, Seunggab ;
Lee, Changhee .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 555 :44-51
[20]   Degradation of impact fracture during accelerated aging of weld metal on microalloyed steel [J].
Vargas-Arista, B. ;
Hallen, J. M. ;
Albiter, A. ;
Angeles-Chavez, C. .
REVISTA DE METALURGIA, 2008, 44 (06) :485-492
12345