Effect of Alloying Elements and Low Temperature Plasma Nitriding on Corrosion Resistance of Stainless Steel

Although nitriding treatment usually improves the hardness and wear resistance of stainless steel, it also reduces its corrosion resistance. The effects of different nitriding temperatures and time and main alloying elements in stainless steel on the properties of the martensitic precipitation hardening of stainless steel were studied by first-principles calculations and experiments in this study. The results showed that the corrosion resistance of the martensitic stainless steel 0Cr17Ni4Cu4Nb was much lower than that of 1Cr15Ni2Mo2Cu before and after nitriding. According to the density functional theory calculation results, the molybdenum-containing stainless steel had higher stability and corrosion resistance and a lower Fermi level, electron conduction concentration and electrochemical activity than the niobium-containing stainless steel before and after nitriding. In addition, at the same temperature, the surface hardness of the 1Cr15Ni2Mo2Cu steel increased linearly with the prolongation of nitriding time, but its corrosion resistance decreased. Under the same nitriding time (24 h), the nitriding temperature increased from 300 to 450 degrees C, and the surface hardness and nitriding layer depth of the nitriding steel increased gradually, while the corrosion resistance decreased gradually. These results were attributed to the Cr-poor phenomenon caused by the formation of CrN. The 1Cr15Ni2Mo2Cu martensitic stainless steel obtained a high surface hardness after nitriding at 300 degrees C for 24 h, and the corrosion resistance did not decrease.