Microstructure and Wear Resistance of Plasma-Sprayed Molybdenum Coating Reinforced by MoSi2 Particles

被引：51
|
作者：
Yan, Jianhui [1 ]
He, Zheyu [1 ]
Wang, Yi [1 ]
Qiu, Jingwen [1 ]
Wang, Yueming [1 ]
机构：
[1] Hunan Univ Sci & Technol, Hunan Prov Key Def Lab High Temp Wear Resisting M, Xiangtan, Peoples R China
来源：
JOURNAL OF THERMAL SPRAY TECHNOLOGY | 2016年 / 25卷 / 07期
基金：
中国国家自然科学基金;
关键词：
atmospheric plasma spraying; molybdenum coating; MoSi2; wear resistance; MECHANICAL-PROPERTIES; DEPOSITION; BEHAVIOR; FUEL; MO;
D O I：
10.1007/s11666-016-0440-6
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Mo coatings with or without incorporated MoSi2 were fabricated by atmospheric plasma spraying, and their microstructure, microhardness, bond strength, and wear resistance were compared. Two kinds of spray powder, i.e., pure Mo and a blend of Mo and MoSi2, were sprayed onto low-carbon steel. Microstructural analysis of the MoSi2-Mo coating showed MoSi2 homogeneously distributed in a Mo matrix. Addition of MoSi2 particles increased the microhardness of the as-sprayed Mo coating. The adhesion strength of the Mo coating was better than that of the MoSi2-Mo coating. Wear test results showed that the wear rate and friction coefficient of the two coatings increased with increasing load, and the friction coefficient of the MoSi2-Mo coating was lower than that of the Mo coating. The MoSi2-Mo composite coating exhibited better wear resistance than the Mo coating. The wear failure mechanisms of the two coatings were local plastic deformation, delamination, oxidation, and adhesion wear.
引用
收藏
页码：1322 / 1329
页数：8
相关论文
共 50 条
  • [21] Wear Resistance of Plasma-Sprayed Coatings in Intensive Abrasive Wear Conditions
    Umanskii, A. P.
    Terentiev, A. E.
    Brazhevsky, V. P.
    Chernyshov, A. A.
    Labunets, V. F.
    Radko, O. V.
    Zakiev, I. M.
    POWDER METALLURGY AND METAL CERAMICS, 2020, 58 (9-10) : 559 - 566
  • [22] Microstructure and tribological properties of atmospheric plasma-sprayed TiO2 coatings reinforced by boron nitride nanosheets
    Du, Daozhong
    Zhang, Chao
    Wang, Yongliang
    Wang, Yun
    Li, Ruitao
    Liu, Zhenqiang
    Yang, Hao
    COMPOSITE INTERFACES, 2024,
  • [23] The effect of ball milling on the microstructure of powder metallurgy aluminium matrix composites reinforced with MoSi2 intermetallic particles
    Corrochano, J.
    Lieblich, M.
    Ibanez, J.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (09) : 1093 - 1099
  • [24] MICROSTRUCTURE AND PITTING CORROSION OF PLASMA-SPRAYED Ni-Al NANOCOMPOSITE COATING
    Shi, X.
    Zhong, Q. D.
    SURFACE REVIEW AND LETTERS, 2016, 23 (06)
  • [25] Effect of heat treatment on microstructure and property of plasma-sprayed lanthanum hexaaluminate coating
    Sun, Junbin
    Wang, Jinshuang
    Dong, Shujuan
    Hui, Yu
    Li, Lifen
    Deng, Longhui
    Jiang, Jianing
    Zhou, Xin
    Cao, Xueqiang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 739 : 856 - 865
  • [26] Influence of different coating structures on the oxidation resistance of MoSi2 coatings
    Liu, L.
    Zhang, H. Q.
    Lei, H.
    Li, H. Q.
    Gong, J.
    Sun, C.
    CERAMICS INTERNATIONAL, 2020, 46 (05) : 5993 - 5997
  • [27] Plasma-Sprayed Alumina Coating Reinforced with Carbon Nanotubes and Graphene Nanoplatelets: Wear Performance in Adverse Environment
    Pandey, Krishna Kant
    Maurya, Shubhendra Shivam
    Grain, Abhishek Kumar
    Prasad, Suraj
    Kudva, Amit
    Pandey, Shailesh Mani
    Keshri, Anup Kumar
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (08) : 2011 - 2022
  • [28] Research on wear resistance of plasma remelted FeNiCrAl sprayed coating
    Sheng, Zhongqi
    Zhou, Jing
    Xuan, Jiayao
    Wei, Shicheng
    Wang, Yujiang
    Liang, Yi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2018, 232 (12) : 1036 - 1043
  • [29] Improving oxidation resistance of MoSi2 coating by reinforced with Al2O3 whiskers
    Wang, Lu
    Fu, Qiangang
    Zhao, Fengling
    INTERMETALLICS, 2018, 94 : 106 - 113
  • [30] Effect of Tungsten Inert Gas Arc Remelting on Microstructure and Wear Properties of Plasma-Sprayed NiCr-Cr3C2 Coating
    Yuan, Jing-min
    Dong, Tian-shun
    Fu, Bin-guo
    Li, Guo-lu
    Liu, Li
    Wang, Ran
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (10) : 6320 - 6329
12345