Design Study for a New Spanner

被引：0

作者：

Lin, Ming-Che ^{[1
]}

Ho, Tsung-Han ^{[2
]}

机构：

[1] Natl Kaohsiung Univ Sci & Technol, Dept Mech Engn, Jiangong Campus, Kaohsiung 80778, Taiwan

[2] Natl Kaohsiung Univ Sci & Technol, Dept Chem & Mat Engn, Jiangong Campus, Kaohsiung 80778, Taiwan

来源：

APPLIED SCIENCES-BASEL | 2021年 / 11卷 / 19期

关键词：

spanner; stop valve; CAE;

D O I：

10.3390/app11198878

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

A replacement for the original F-spanner is designed using computer-aided engineering (CAE) and the Taguchi method. In the design process, the L-9(3(4)) orthogonal table was used for parameter design. Four control factors are used: outer diameter, bend radius, angle, and connected fillet. Each factor is set to three levels with numerical analysis using ANSYS software. After performing an optimization analysis for the combination parameters, the prototype is created by rapid-prototyping (RP) and is found to improve operational safety in a piping system.

引用

页数：6