Improvement of corrosion resistance of SS316L manufactured by selective laser melting through subcritical annealing

被引：96
作者：
Zhou, Chengshuang [1 ]
Hu, Shiyin [1 ]
Shi, Qiaoying [1 ]
Tao, Huimin [1 ]
Song, Yangyang [1 ]
Zheng, Jinyang [2 ]
Xu, Peng [3 ]
Zhang, Lin [1 ]
机构：
[1] Zhejiang Univ Technol, Coll Mat Sci & Engn, Hangzhou 310014, Peoples R China
[2] Zhejiang Univ, Inst Proc Equipment, Hangzhou 310027, Peoples R China
[3] Hefei Gen Machinery Res Inst, Hefei 230031, Peoples R China
来源：
CORROSION SCIENCE | 2020年 / 164卷
基金：
中国国家自然科学基金;
关键词：
Stainless steel; Polarisation; Polarization; SEM; TEM; Pitting corrosion; 316L STAINLESS-STEEL; SUB-GRAIN STRUCTURE; INTERGRANULAR CORROSION; MECHANICAL-PROPERTIES; PITTING CORROSION; HEAT-TREATMENT; MICROSTRUCTURE; BEHAVIOR; PARAMETERS; TI-6AL-4V;
D O I：
10.1016/j.corsci.2019.108353
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of heat treatment on pitting-corrosion resistance of 316 L stainless steel manufactured via selective laser melting (SLM) was investigated. The result shows that both pitting-corrosion resistance and mechanical properties under Subcritical-temperature heat treatment (950 degrees C) are better than 1100 degrees C and as-received. For as received samples, the most prone to pitting corrosion is melt-pool boundary (MPB). Subcritical-temperature heat treatment not only eliminates MPBs and high-density dislocation but also retains advantages of inclusion nanocrystallisation, cellular substructure. And recrystallisation occurs during 1100 degrees C heat treatment significantly reduces low-angle grain-boundary density and increases segregation and re-precipitation, which weakens corrosion resistance and mechanical properties.
引用
收藏
页数：11
相关论文
共 50 条
[31]   Microstructure and wear properties of selective laser melting 316L [J].
Huang, Yubao ;
Yang, Shanglei ;
Gu, Jiaxing ;
Xiong, Qi ;
Duan, Chenfeng ;
Meng, Xuan ;
Fang, Yu .
MATERIALS CHEMISTRY AND PHYSICS, 2020, 254
[32]   Computational Approaches of Quasi-Static Compression Loading of SS316L Lattice Structures Made by Selective Laser Melting [J].
Cervinek, Ondrej ;
Werner, Benjamin ;
Koutny, Daniel ;
Vaverka, Ondrej ;
Pantelejev, Libor ;
Palousek, David .
MATERIALS, 2021, 14 (09)
[33]   Influence of laser processing parameters on the surface characteristics of 316L stainless steel manufactured by selective laser melting [J].
Dursun, Gokhan ;
Ibekwe, Samuel ;
Li, Guoqiang ;
Mensah, Patrick ;
Joshi, Ghanashyam ;
Jerro, Dwayne .
MATERIALS TODAY-PROCEEDINGS, 2020, 26 :387-393
[34]   Laser Polishing of Additive Manufactured 316L Stainless Steel Synthesized by Selective Laser Melting [J].
Obeidi, Muhannad A. ;
McCarthy, Eanna ;
O'Connell, Barry ;
Ul Ahad, Inam ;
Brabazon, Dermot .
MATERIALS, 2019, 12 (06)
[35]   Anisotropy in mechanical properties and corrosion resistance of 316L stainless steel fabricated by selective laser melting [J].
Ni, Xiao-qing ;
Kong, De-cheng ;
Wen, Ying ;
Zhang, Liang ;
Wu, Wen-heng ;
He, Bei-bei ;
Lu, Lin ;
Zhu, De-xiang .
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2019, 26 (03) :319-328
[36]   Experimental validation and microstructure characterization of topology optimized, additively manufactured SS316L components [J].
Rankouhi, B. ;
Bertsch, K. M. ;
de Bellefon, G. Meric ;
Thevamaran, M. ;
Thoma, D. J. ;
Suresh, K. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 776
[37]   Fatigue Fracture of 316L Steel Manufactured by Selective Laser Melting [J].
Botvina, L. R. ;
Belecky, E. N. ;
Demina, Yu. A. ;
Ivanov, I. A. .
INORGANIC MATERIALS, 2024, 60 (04) :536-546
[38]   Fatigue Strength of 316 L Stainless Steel Manufactured by Selective Laser Melting [J].
Hatami, Sepehr ;
Ma, Taoran ;
Vuoristo, Taina ;
Bertilsson, Jens ;
Lyckfeldt, Ola .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (05) :3183-3194
[39]   Rate controlling deformation mechanisms in SS316L stainless steel manufactured using laser powder bed fusion technique [J].
Jain, Roopam ;
Yadava, Manasij ;
Tripathi, Aparna ;
Gurao, N. P. .
INTERNATIONAL JOURNAL OF PLASTICITY, 2023, 171
[40]   Interfacial Characterization of Selective Laser Melting of a SS316L/NiTi Multi-Material with a High-Entropy Alloy Interlayer [J].
Repnin, Arseniy ;
Kim, Artem ;
Popovich, Anatoliy .
CRYSTALS, 2023, 13 (10)
12345