Improvement of corrosion resistance of SS316L manufactured by selective laser melting through subcritical annealing

被引：96
作者：
Zhou, Chengshuang [1 ]
Hu, Shiyin [1 ]
Shi, Qiaoying [1 ]
Tao, Huimin [1 ]
Song, Yangyang [1 ]
Zheng, Jinyang [2 ]
Xu, Peng [3 ]
Zhang, Lin [1 ]
机构：
[1] Zhejiang Univ Technol, Coll Mat Sci & Engn, Hangzhou 310014, Peoples R China
[2] Zhejiang Univ, Inst Proc Equipment, Hangzhou 310027, Peoples R China
[3] Hefei Gen Machinery Res Inst, Hefei 230031, Peoples R China
来源：
CORROSION SCIENCE | 2020年 / 164卷
基金：
中国国家自然科学基金;
关键词：
Stainless steel; Polarisation; Polarization; SEM; TEM; Pitting corrosion; 316L STAINLESS-STEEL; SUB-GRAIN STRUCTURE; INTERGRANULAR CORROSION; MECHANICAL-PROPERTIES; PITTING CORROSION; HEAT-TREATMENT; MICROSTRUCTURE; BEHAVIOR; PARAMETERS; TI-6AL-4V;
D O I：
10.1016/j.corsci.2019.108353
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of heat treatment on pitting-corrosion resistance of 316 L stainless steel manufactured via selective laser melting (SLM) was investigated. The result shows that both pitting-corrosion resistance and mechanical properties under Subcritical-temperature heat treatment (950 degrees C) are better than 1100 degrees C and as-received. For as received samples, the most prone to pitting corrosion is melt-pool boundary (MPB). Subcritical-temperature heat treatment not only eliminates MPBs and high-density dislocation but also retains advantages of inclusion nanocrystallisation, cellular substructure. And recrystallisation occurs during 1100 degrees C heat treatment significantly reduces low-angle grain-boundary density and increases segregation and re-precipitation, which weakens corrosion resistance and mechanical properties.
引用
收藏
页数：11
相关论文
共 50 条
[21]   The enhancement of microstructure on the passive and pitting behaviors of selective laser melting 316L SS in simulated body fluid [J].
Man, Cheng ;
Dong, Chaofang ;
Liu, Tingting ;
Kong, Decheng ;
Wang, Daokuan ;
Li, Xiaogang .
APPLIED SURFACE SCIENCE, 2019, 467 :193-205
[22]   Effect of Strain Rate on the Dynamic Recrystallization Behavior in a Nitrogen-Enhanced 316L(N) [J].
Mandal, Sumantra ;
Jayalakshmi, M. ;
Bhaduri, A. K. ;
Sarma, V. Subramanya .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (12) :5645-5656
[23]   Corrosion Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting Under Different Scanning Speeds [J].
Ni, Xiaoqing ;
Kong, Decheng ;
Wu, Wenheng ;
Zhang, Liang ;
Dong, Chaofang ;
He, Beibei ;
Lu, Lin ;
Wu, Kaiqi ;
Zhu, Dexiang .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (07) :3667-3677
[24]   Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting [J].
Saeidi, K. ;
Gao, X. ;
Lofaj, F. ;
Kvetkova, L. ;
Shen, Z. J. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 633 :463-469
[25]   Hardened austenite steel with columnar sub-grain structure formed by laser melting [J].
Saeidi, K. ;
Gao, X. ;
Zhong, Y. ;
Shen, Z. J. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 625 :221-229
[26]   Corrosion of Additively Manufactured Alloys: A Review [J].
Sander, G. ;
Tan, J. ;
Balan, P. ;
Gharbi, O. ;
Feenstra, D. R. ;
Singer, L. ;
Thomas, S. ;
Kelly, R. G. ;
Scully, J. R. ;
Birbilis, N. .
CORROSION, 2018, 74 (12) :1318-1350
[27]   On The Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting [J].
Sander, G. ;
Thomas, S. ;
Cruz, V. ;
Jurg, M. ;
Birbilis, N. ;
Gao, X. ;
Brameld, M. ;
Hutchinson, C. R. .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2017, 164 (06) :C250-C257
[28]   The Role of Microstructure and Surface Finish on the Corrosion of Selective Laser Melted 304L [J].
Schaller, Rebecca F. ;
Mishra, Ajit ;
Rodelas, Jeffrey M. ;
Taylor, Jason M. ;
Schindelholz, Eric J. .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2018, 165 (05) :C234-C242
[29]   Microstructure and corrosion resistance of a type 316L stainless steel [J].
Shieu, FS ;
Deng, MJ ;
Lin, SH .
CORROSION SCIENCE, 1998, 40 (08) :1267-1279
[30]   Effect of surface oxide properties on corrosion resistance of 316L stainless steel for biomedical applications [J].
Shih, CC ;
Shih, CM ;
Su, YY ;
Su, LHJ ;
Chang, MS ;
Lin, SJ .
CORROSION SCIENCE, 2004, 46 (02) :427-441
12345