Effect of some parameters on microstructure and hardness of alumina coatings prepared by the air plasma spraying process

被引：152

作者：

Sarikaya, O ^{[1
]}

机构：

[1] Sakarya Univ, Fac Engn, Dept Mech Engn, TR-54187 Sakarya, Turkey

来源：

SURFACE & COATINGS TECHNOLOGY | 2005年 / 190卷 / 2-3期

关键词：

plasma spray; Al2O3; spray distance; hardness; porosity; coating roughness;

D O I：

10.1016/j.surfcoat.2004.02.007

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The spraying distance, substrate temperature, coating thickness and surface roughness of substrate during deposition play an important role on the plasma spray coating process and effect the final properties of the coatings. Al2O3 coatings on AISI 304 L stainless steel substrate were prepared to investigate the effects on the coating of these parameters. The results indicated that the parameters such as the spraying distance, substrate temperature, coating thickness and substrate roughness were fairly effected the hardness, porosity and surface roughness of Al2O3 coatings. The lowest surface roughness and the lowest porosity and the highest hardness values of Al2O3 coating were obtained for the spraying distance of 12 cm. and the surface roughness of 3.28 mum and the substrate temperature of 500 degreesC. It also found that the increases of coating thickness were lowered the hardness and enhanced the porosity and the coating roughness. (C) 2004 Elsevier B.V. All rights reserved.

引用

页码：388 / 393

页数：6

共 15 条

[1] Effect of grit blasting of substrate on the corrosion behaviour of plasma-sprayed Al2O3 coatings [J].

Celik, E ;

Demirkiran, AS ;

Avci, E .

SURFACE & COATINGS TECHNOLOGY, 1999, 116 :1061-1064

[2] Effects of some parameters on corrosion behaviour of plasma-sprayed coatings [J].

Celik, E ;

Sengil, IA ;

Avci, E .

SURFACE & COATINGS TECHNOLOGY, 1997, 97 (1-3) :355-360

[3] Effect of the thickness of plasma-sprayed coating on bond strength and thermal fatigue characteristics [J].

Choi, HM ;

Kang, BS ;

Choi, WK ;

Choi, DG ;

Choi, SK ;

Kim, JC ;

Park, YK ;

Kim, GM .

JOURNAL OF MATERIALS SCIENCE, 1998, 33 (24) :5895-5899

[4] Influence of particle in-flight characteristics on the microstructure of atmospheric plasma sprayed yttria stabilized ZrO2 [J].

Friis, M ;

Persson, C ;

Wigren, J .

SURFACE & COATINGS TECHNOLOGY, 2001, 141 (2-3) :115-127

[5] High hardness alumina coatings prepared by low power plasma spraying [J].

Gao, Y ;

Xu, XL ;

Yan, ZJ ;

Xin, G .

SURFACE & COATINGS TECHNOLOGY, 2002, 154 (2-3) :189-193

[6] Influence of plasma spray parameters on mechanical properties of yttria stabilized zirconia coatings. II: Acoustic emission response [J].

Kucuk, A ;

Berndt, CC ;

Senturk, U ;

Lima, RS .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 284 (1-2) :41-50

[7] Microstructure and composition analysis in plasma sprayed coatings of Al2O3/ZrSiO4 mixtures [J].

Li, Y ;

Khor, KA .

SURFACE & COATINGS TECHNOLOGY, 2002, 150 (2-3) :125-132

[8] Intrinsic residual stresses in single splats produced by thermal spray processes [J].

Matejicek, J ;

Sampath, S .

ACTA MATERIALIA, 2001, 49 (11) :1993-1999

[9] MICROSTRUCTURAL CHARACTERISTICS OF PLASMA SPRAY CONSOLIDATED AMORPHOUS POWDERS [J].

SAMPATH, S .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1993, 167 (1-2) :1-10

[10] Development of process maps for plasma spray: case study for molybdenum [J].

Sampath, S ;

Jiang, X ;

Kulkarni, A ;

Matejicek, J ;

Gilmore, DL ;

Neiser, RA .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 348 (1-2) :54-66

← 1 2 →