Experimentation and numerical modeling on the response of woven glass/epoxy composite plate under blast impact loading

被引:12
作者
Gunaryo, Kasmidi [1 ]
Heriana, Heri [1 ]
Sitompul, M. Rafiqi [1 ]
Kuswoyo, Andi [1 ]
Hadi, Bambang K. [1 ]
机构
[1] Inst Teknol Bandung, Fac Mech & Aerosp Engn, Jl Ganesha 10, Bandung 40132, Indonesia
关键词
Glass; epoxy composite plate; Blast loading; Smooth particle hydrodynamics; CONWEP;
D O I
10.1186/s40712-020-0116-3
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Background Composite material is being used in vehicles for protective structures against blast loading. Limited data is available which compare experimental works and numerical analysis in the open field environment. More data is needed in this area in order to be able to predict and use composite materials safely. Methods In this work, the response of woven glass/epoxy composite plates under blast loading was investigated, both experimentally and numerically. The plate was manufactured using glass/epoxy woven Cytec 120 degrees C curing system. The explosive material was Tri-Nitro-Toluen (TNT) with different masses, which are 60, 80, and 100 g. The stand-off distance was also varied, ranging from 300 up to 1000 mm. In the experimental work, a sewing needle pin was put under the plate to record the maximum deformation of the plate during TNT explosion. In the numerical analysis, LS-DYNA was used extensively. The composite plate was modeled as shell elements using MAT54, and the failure criteria was Chang-Chang failure criteria. The explosive TNT material was modeled in two different ways. First, it was modeled using CONWEP and the second was modeled using Smooth Particle Hydrodynamics (SPH). The numerical analysis results were then compared with the experimental data for the case of maximum deformation. Results Experimentally, the sewing needle method was able to measure the plate maximum deformation during the explosion. The numerical analysis showed that the SPH model gave better agreement with experimental results compared with CONWEP method. The SPH results were in the range of 8-18% compared to experimental data, while the CONWEP results were in the range of 14-43%. Conclusion Albeit its simplicity, sewing needle method was able to measure the maximum deformation for blast loading experimentation. The SPH model was better compared with CONWEP method in analyzing the response of composite plate subjected to blast loading.
引用
收藏
页数:9
相关论文
共 36 条
[21]   Damage evolution in glass/epoxy composites engineered using core-shell microparticles under impact loading [J].
Ali, Mubarak ;
Joshi, Sunil C. .
JOURNAL OF MATERIALS SCIENCE, 2013, 48 (24) :8354-8367
[22]   Damage Characterization in Glass/Epoxy Composite Laminates under Normal and Oblique Planes of Cyclic Indentation Loading with AE Monitoring [J].
Jayababu, A. ;
Arumugam, V ;
Rajesh, B. ;
Kumar, C. Suresh .
MATERIALS EVALUATION, 2021, 79 (01) :61-77
[23]   Dynamic response of cylindrical sandwich shells with metallic foam cores under blast loading-Numerical simulations [J].
Jing, Lin ;
Wang, Zhihua ;
Zhao, Longmao .
COMPOSITE STRUCTURES, 2013, 99 :213-223
[24]   Dynamic response of thin concrete slabs subjected to sequential projectile impact and blast loading: An experimental and numerical investigation [J].
Lee, Minjoo ;
Kristoffersen, Martin ;
Borvik, Tore .
INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES, 2025,
[25]   Failure Analysis and Piezo-Resistance Response of Intralaminar Glass/Carbon Hybrid Composites Under Blast Loading Conditions [J].
Lincon, Mazharul Islam ;
Chaudhary, Birendra ;
Matos, Helio ;
Chalivendra, Vijaya ;
Shukla, Arun .
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2025, 147 (01)
[26]   The influence of carbon-glass/epoxy hybrid composite under mode I fatigue loading: Physical-based characterization [J].
Monticeli, Francisco M. ;
Voorwald, Herman Jacobus Cornelis ;
Cioffi, Maria Odila Hilario .
COMPOSITE STRUCTURES, 2022, 286
[27]   Dynamic response and blast resistance of I-shaped steel-concrete composite beam under explosive loading [J].
Li, Yuan ;
Lin, Qutong ;
Liu, Jianyu .
STRUCTURAL CONCRETE, 2025, 26 (03) :3197-3219
[28]   Experimental, numerical, and theoretical studies of the response of short cylindrical stainless steel tubes under lateral air blast loading [J].
Li, Shiqiang ;
Yu, Boli ;
Karagiozova, Dora ;
Liu, Zhifang ;
Lu, Guoxing ;
Wang, Zhihua .
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2019, 124 :48-60
[29]   Experimental and numerical investigation on hypervelocity impact response of 2D plain-woven C/SiC composite [J].
Yang, Yang ;
Xu, Fei .
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (01) :11-16
[30]   Experimental and numerical investigation on hypervelocity impact response of 2D plain-woven C/SiC composite [J].
Yang Yang ;
Fei Xu .
Journal of Mechanical Science and Technology, 2015, 29 :11-16