Bonding adhesive strength for plasma spray with cathode spots of low-pressure arc after grit blasting and removal of oxide layer on metal surface

Cathode spots of a low-pressure arc can remove oxide layers and evaporate impurities on metal surfaces. Removal of the oxide layer using cathode spots is expected to solve recent obstacles due to chemical and mechanical cleaning methods. Various phenomena of cathode spots have been investigated for pre-treatment of atmospheric pressure plasma spray (APPS). This study treated the surface shapes of oxide and non-oxide samples using a composite pre-treating method: cathode spots after grit blasting. In addition, the samples are compared with conventionally treated cathode spots and mechanical blasted surfaces. Results show that roughness on the sample surfaces becomes higher in concomitance with the initial oxide layer thickness. This fact reveals the factors those dominant bonding strength on the pre-treated surface using cathode spots of a low-pressure arc. Bonding strength becomes higher in relation to the arithmetical mean height of the surface roughness caused by the initial oxide layer thickness. Bonding strength is higher when the mean spacing of profile irregularities is narrower. The bonding adhesive strength after treatment using cathode spots after grit blasting is greater than 90 MPa. However, cathode spot treatment must be limited not to destroy the projection formed by melting after grit blasting in an arc time up to 5 s. And basically the removal characteristics of oxide layer using the cathode spots were discussed on the trace, roughness, number of cathode spots in time and pressure, moving speed on the metal surface, etc. (C) 2007 Published by Elsevier B.V.