Temperature rise up to melting under quasi-static loading conditions induced by adiabatic shear banding

被引：6

作者：

Choisez, L. ^{[1
]}

Roy, G. ^{[1
]}

Jacques, P. J. ^{[1
]}

机构：

[1] UCLouvain, Inst Mech Mat & Civil Engn, IMAP, Pl St Barbe 2, B-1348 Louvain La Neuve, Belgium

来源：

MATERIALS & DESIGN | 2021年 / 212卷

关键词：

Adiabatic shear banding; Temperature rise; Fusible coating method; Two-dimensional heat diffusion model; Metastable Ti alloy; LOADED PRENOTCHED PLATES; SMEAR BANDS; TITANIUM; LOCALIZATION; PROPAGATION; FAILURE; STRAIN; MICROSTRUCTURE; DEPENDENCE; SEPARATION;

D O I：

10.1016/j.matdes.2021.110269

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Adiabatic shear banding propagating at very large speed was observed during the unstable fracture of TRIP-TWIP b -metastable Ti-12 wt% Mo alloy under quasi-static loading. The fusible coating method was used with five different coatings to assess the predicted temperature variations. Two onedimensional models are compared based on parameters measured on fractured samples of Ti-12 wt% Mo alloy. The importance of the thickness of the shear band as well as of the shearing time are highlighted. A new two-dimensional model is then developed to represent the nucleation and propagation of the shear band. Finally, an analytical one-dimensional model is proposed to estimate the temperature rise occurring during adiabatic shear banding of other metallic alloys from easily accessible physical and mechanical properties. (c) 2021 Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/).

引用

页数：13

共 50 条

[1] Plastic strain localization in metals: origins and consequences [J].

Antolovich, Stephen D. ;

Armstrong, Ronald W. .

PROGRESS IN MATERIALS SCIENCE, 2014, 59 :1-160

[2] THE INSTABILITY OF PLASTIC FLOW OF METALS AT VERY LOW TEMPERATURES [J].

BASINSKI, ZS .

PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1957, 240 (1221) :229-242

[3] EFFECT OF THERMAL-CONDUCTIVITY ON THE INITIATION, GROWTH AND BANDWIDTH OF ADIABATIC SHEAR BANDS [J].

BATRA, RC ;

KIM, CH .

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, 1991, 29 (08) :949-960

[4] Quantitative evaluation of lengthscales for temperature rise in shear bands and for failure of metallic glasses [J].

Battezzati, L. ;

Baldissin, D. .

SCRIPTA MATERIALIA, 2008, 59 (02) :223-226

[5] THERMOPHYSICAL PROPERTIES OF STAINLESS-STEELS [J].

BOGAARD, RH ;

DESAI, PD ;

LI, HH ;

HO, CY .

THERMOCHIMICA ACTA, 1993, 218 :373-393

[6] Analysis of the dynamic propagation of adiabatic shear bands [J].

Bonnet-Lebouvier, AS ;

Molinari, A ;

Lipinski, P .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2002, 39 (16) :4249-4269

[7] Spontaneous dissipation of elastic energy by self-localizing thermal runaway [J].

Braeck, S. ;

Podladchikov, Y. Y. ;

Medvedev, S. .

PHYSICAL REVIEW E, 2009, 80 (04)

[8] A β-titanium alloy with extra high strain-hardening rate: Design and mechanical properties [J].

Brozek, C. ;

Sun, F. ;

Vermaut, P. ;

Millet, Y. ;

Lenain, A. ;

Embury, D. ;

Jacques, P. J. ;

Prima, F. .

SCRIPTA MATERIALIA, 2016, 114 :60-64

[9] OBSERVATIONS ON THE EFFECT OF TEMPERATURE RISE AT FRACTURE IN 2 TITANIUM-ALLOYS [J].

BRYANT, JD ;

MAKEL, DD ;

WILSDORF, HGF .

MATERIALS SCIENCE AND ENGINEERING, 1986, 77 (1-2) :85-93

[10]

Carslaw H S, 1986, Conduction of Heat in Solids

← 1 2 3 4 5 →