Process Development of Metal-Composite Hybrid Structures

被引：0
|
作者：
Hwang, Hui-Yun [1 ]
Roney, Md Fardim Sufian [2 ]
Xi, Zhu [2 ]
机构：
[1] Andong Natl Univ, Dept Mech & Robot Engn, Andong, South Korea
[2] Andong Natl Univ, Dept Mech Design Engn, Andong, South Korea
来源：
COMPOSITES RESEARCH | 2021年 / 34卷 / 03期
关键词：
Recycling; Composite Materials; Metals; Hybrid Structures; LIFE-CYCLE ENERGY; ADHESIVES;
D O I：
10.7234/composres.2021.34.3.167
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Recently, metal-composite hybrid structures became a very attractive material system for various applications such as automobile and air vehicles due to their design flexibility as well as superior mechanical properties. On the other hand, recycling is a hot issue to reduce material wastes and environmental pollution, so that many countries made recycling regulations. But the recycling of metal-composite hybrid structures is not fully considered since the development and application are very early stage. We developed and optimized the recycling process for metal-composite hybrid structures based on the easy adaptation of the local recycling companies.
引用
收藏
页码：167 / 173
页数：7
相关论文
共 50 条
  • [11] On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces
    R. Kießling
    J. Ihlemann
    M. Pohl
    M. Stommel
    C. Dammann
    R. Mahnken
    M. Bobbert
    G. Meschut
    F. Hirsch
    M. Kästner
    Applied Composite Materials, 2017, 24 : 251 - 269
  • [12] On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces
    Kiessling, R.
    Ihlemann, J.
    Pohl, M.
    Stommel, M.
    Dammann, C.
    Mahnken, R.
    Bobbert, M.
    Meschut, G.
    Hirsch, F.
    Kaestner, M.
    APPLIED COMPOSITE MATERIALS, 2017, 24 (01) : 251 - 269
  • [13] Hybrid metal-composite conical tubes for energy absorption; theoretical development and numerical simulation
    Shiravand, Ali
    Asgari, Masoud
    THIN-WALLED STRUCTURES, 2019, 145
  • [14] A State-of-the-Art Review on Advanced Joining Processes for Metal-Composite and Metal-Polymer Hybrid Structures
    Lambiase, Francesco
    Scipioni, Silvia Ilaria
    Lee, Chan-Joo
    Ko, Dae-Cheol
    Liu, Fengchao
    MATERIALS, 2021, 14 (08)
  • [15] Contribution to the Optimization of Metal-Composite Lightweight Structures in Contextof Digital Linked Development Processes
    Folprecht, Fabian
    Bonn, Felix
    Haider, Daniel Reinhold
    Spitzer, Sebastian
    Gude, Maik
    FUTURE AUTOMOTIVE PRODUCTION CONFERENCE 2022, 2023, : 228 - 236
  • [16] An investigation of the ultrasonic joining process parameters effect on the mechanical properties of metal-composite hybrid joints
    Feistauer, E. E.
    dos Santos, J. F.
    Amancio-Filho, S. T.
    WELDING IN THE WORLD, 2020, 64 (09) : 1481 - 1495
  • [17] An investigation of the ultrasonic joining process parameters effect on the mechanical properties of metal-composite hybrid joints
    E. E. Feistauer
    J. F. dos Santos
    S. T. Amancio-Filho
    Welding in the World, 2020, 64 : 1481 - 1495
  • [18] Progressive failure of metal-composite hybrid wheels under impact
    Hwang, Shun-Fa
    Yu, Hui-Lun
    Liu, Yu-Jen
    Chen, Yuder
    Chen, Shih-Chieh
    Hsieh, Yueh-Chih
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2018, 32 (01) : 223 - 229
  • [19] Axial crushing of metal-composite hybrid tubes: experimental analysis
    Boria, Simonetta
    Scattina, Alessandro
    Belingardi, Giovanni
    AIAS2017 - 46TH CONFERENCE ON STRESS ANALYSIS AND MECHANICAL ENGINEERING DESIGN, 2018, 8 : 102 - 117
  • [20] Experimental investigation of a novel hybrid metal-composite joining technology
    Ucsnik, S.
    Scheerer, M.
    Zaremba, S.
    Pahr, D. H.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (03) : 369 - 374
12345