Effect of nano-carbide formation on hydrogen-delayed fracture for quenching and tempering steels during high-frequency induction heat treatment

被引：36

作者：

Kang, Hee Jae ^{[1
]}

Yoo, Jae Seok ^{[1
]}

Park, Ji Tae ^{[2
]}

Ahn, Soon Tae ^{[2
]}

Kang, Namhyun ^{[1
]}

Cho, Kyung-Mox ^{[1
]}

机构：

[1] Pusan Natl Univ, Dept Mat Sci & Engn, Pusan 609735, South Korea

[2] Samhwa Steel, Pusan 617825, South Korea

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2012年 / 543卷

基金：

新加坡国家研究基金会;

关键词：

Hydrogen delayed fracture; Trapping site; Thermal desorption spectrometry; Precipitation; HIGH-STRENGTH STEELS; EMBRITTLEMENT; IRON; CEMENTITE;

D O I：

10.1016/j.msea.2012.02.008

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The amount, size, and spheroidization of nano-carbides were evaluated to determine their effect on the hydrogen-delayed fracture (HDF) properties of high-strength steel wires produced by quenching and tempering (QT) during high-frequency induction heat treatment. The steel wires had a microstructure of tempered martensite showing a tensile strength of 1.2 GPa. The size of the carbide decreased and the spheroidization increased with the tempering temperature. The 0.3C-Si steels that have needle-like carbides were more susceptible to HDF than the other steels (0.2C-Cr and 0.2C-Cr-Mo) that have carbides of high spheroidization rate. Calculation of the activation energy using thermal desorption spectrometry (TDS) defined the hydrogen trapping site. The trapping sites of diffusible hydrogen were the grain boundary and lath boundary for all three wires. Carbide/matrix interfaces trapped nondiffusible hydrogen for all specimens. The 0.2C-Cr steel exhibited the largest resistance to HDF because of the nano-sized and spheroidized carbide. (C) 2012 Elsevier B.V. All rights reserved.

引用

页码：6 / 11

页数：6

共 23 条

[1]

Ahn S.T., 2002, J KOREAN INST MET MA, V40, P252

[2]

[Anonymous], 1968, METAL SCI J, DOI DOI 10.1179/030634568790443585

[3]

Bhadeshia H.K., 2006, Steels: Microstructure and Properties, V3rd, P183, DOI [10.1016/B978-075068084-4/50011-X, DOI 10.1016/B978-075068084-4/50011-X]

[4] THERMAL-ANALYSIS OF TRAPPED HYDROGEN IN PURE IRON [J].

CHOO, WY ;

LEE, JY .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1982, 13 (01) :135-140

[5] Control of cementite precipitation in lath martensite by rapid heating and tempering [J].

Furuhara, T ;

Kobayashi, K ;

Maki, T .

ISIJ INTERNATIONAL, 2004, 44 (11) :1937-1944

[6] The effect of stress concentration on hydrogen embrittlement of a low alloy steel [J].

Hardie, D ;

Liu, S .

CORROSION SCIENCE, 1996, 38 (05) :721-733

[7]

Hargi H., 1979, T JIM, V20, P349

[8] Atomic force microscopy of induction- and furnace-heating-tempered prestressed steels with different delayed fracture properties [J].

Hayakawa, M ;

Matsuoka, S ;

Tsuzaki, K ;

Hanada, H ;

Sugisaki, M .

SCRIPTA MATERIALIA, 2002, 47 (10) :655-661

[9] 1980 INSTITUTE OF METALS LECTURE THE METALLURGICAL-SOCIETY-OF-AIME - EFFECTS OF HYDROGEN ON THE PROPERTIES OF IRON AND STEEL [J].

HIRTH, JP .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1980, 11 (06) :861-890

[10]

Kim J. S., 2001, Journal of the Korean Institute of Metals and Materials, V39, P493

← 1 2 3 →