Recovery of nickel and cobalt from leach solutions of nickel laterites using a synergistic system consisting of Versatic 10 and Acorga CLX 50

被引：43

作者：

Cheng, Chu Yong ^{[1
]}

Urbani, Mark D. ^{[1
,2
]}

Davies, Michael G. ^{[1
]}

Pranolo, Yoko ^{[1
]}

Zhu, Zhaowu ^{[1
]}

机构：

[1] CSIRO Mineral Resources Natl Res Flagship, Acton, ACT, Australia

[2] Strateg Met Pty Ltd, Brisbane, Qld, Australia

来源：

MINERALS ENGINEERING | 2015年 / 77卷

关键词：

Solvent extraction; Versatic; 10; Acorga CLX 50; Nickel; Cobalt; DIRECT SOLVENT-EXTRACTION; SEPARATION; MANGANESE; MIXTURES; ACIDS;

D O I：

10.1016/j.mineng.2015.01.015

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

A direct solvent extraction (DSX) process to recover nickel and cobalt from laterite leach solutions is potentially more cost effective compared to the traditional precipitation and re-leaching method. A synergistic solvent extraction (SSX) system consisting of Versatic 10 and Acorga CLX 50 in ShellSol 2046 was studied for DSX nickel and cobalt recovery from a synthetic solution using semi-continuous tests. The effect of pH on the metal distribution profile and metal separation were investigated. It was found that the SSX system can effectively recover nickel and cobalt and separate them from manganese, calcium and magnesium. Over 99% of Ni and Co was extracted using four stages of semi-continuous extraction from the synthetic laterite solution at pH 6.3 and an A/O flowrate ratio of 1:1. More than 80% of the manganese was rejected to the raffinate. The co-extraction of calcium was less than 5% and the co-extraction of magnesium was negligible under these conditions. The co-extracted manganese and calcium were readily scrubbed in three stages semi-continuous scrubbing. The loaded strip liquor with a high concentration of nickel (71.3 g/L Ni) was obtained after two-stage continuous stripping. The final strip solution pH of 3 would be suitable for nickel electrowinning. A conceptual DSX process flowsheet using the SSX system to recover nickel and cobalt from laterite leach solutions after iron removal has been proposed. (c) 2015 Published by Elsevier Ltd.

引用

页码：17 / 24

页数：8

共 26 条

[1] The effect of temperature on hydroxyoxime stability in the LIX 63-Versatic 10-tributyl phosphate synergistic solvent extraction system under synthetic nickel laterite conditions [J].

Barnard, K. R. ;

Turner, N. L. .

HYDROMETALLURGY, 2011, 109 (3-4) :245-251

[2] Recovery of nickel and cobalt from laterite leach solutions using direct solvent extraction Part 2: Semi- and fully-continuous tests [J].

Cheng, C. V. ;

Boddy, G. ;

Zhang, W. ;

Godfrey, M. ;

Robinson, D. J. ;

Pranolo, Y. ;

Zhu, Z. ;

Zeng, L. ;

Wang, W. .

HYDROMETALLURGY, 2010, 104 (01) :53-60

[3] Recovery of nickel and cobalt from laterite leach solutions using direct solvent extraction: Part 1-selection of a synergistic SX system [J].

Cheng, C. Y. ;

Boddy, G. ;

Zhang, W. ;

Godfrey, M. ;

Robinson, D. J. ;

Pranolo, Y. ;

Zhu, Z. ;

Wang, W. .

HYDROMETALLURGY, 2010, 104 (01) :45-52

[4]

Cheng C.Y, 2000, ALTA SX 9 1 ALTA MET

[5]

Cheng C.Y., 2005, 17 INT SOLV EXTR C S

[6]

Cheng C.Y., 2005, Patent, US, Patent No. 7935322

[7] Solvent extraction of nickel and cobalt with synergistic systems consisting of carboxylic acid and aliphatic hydroxyoxime [J].

Cheng, Chu Yong .

HYDROMETALLURGY, 2006, 84 (1-2) :109-117

[8] Synergistic Solvent Extraction of Nickel and Cobalt: A Review of Recent Developments [J].

Cheng, Chu Yong ;

Barnard, Keith R. ;

Zhang, Wensheng ;

Robinson, David J. .

SOLVENT EXTRACTION AND ION EXCHANGE, 2011, 29 (5-6) :719-754

[9] A study on the chemical stability of the Versatic 10-Acorga CLX50 synergistic system [J].

Cheng, CY ;

Barnard, KR ;

Davies, MG .

MINERALS ENGINEERING, 2002, 15 (12) :1151-1161

[10] Purification of synthetic laterite leach solution by solvent extraction using D2EHPA [J].

Cheng, CY .

HYDROMETALLURGY, 2000, 56 (03) :369-386

← 1 2 3 →