Ion beam deposition of amorphous hydrogenated carbon films on amorphous silicon interlayer: Experiment and simulation

A thick layer of amorphous silicon (a-Si) was deposited on industrial grade crystalline n-Si < 111 > substrate by means of electron beam evaporation. On top of a-Si layer, amorphous hydrogenated carbon (a-C:H) film was grown by direct ion beam deposition from acetylene precursor gas. In order to study on atomic level the a-C:H film growth on amorphous silicon, a theoretical model was developed in a form of reaction rate (kinetic) equations. Numerical simulation using this model has revealed that the ratio of sp(3)/sp(2) content in the film is heavily influenced by relaxation rate of the carbon atoms in a sub-surface region of the film that were activated by ion irradiation. The final structure of a-C:H film does not depend much on elemental composition and structure of amorphous Si coating, provided that deposition procedure is not terminated at its initial stage but continues for more than 60s. It became evident, therefore, that the use of a-Si interlayer with a-C:H films could be particularly beneficial when a need arises to minimize or eliminate the effect of the substrate. As one of such cases, a poor adhesion of amorphous carbon on steel and other ferrous alloys could be mentioned. (C) 2011 Elsevier B.V. All rights reserved.