A comparison on microstructure features of 24CrNiMo low alloy steel prepared by selective laser melting and laser melting deposition

被引：18
作者：
Cui, X. [1 ]
Zhang, S. [1 ]
Zhang, C. H. [1 ]
Chen, J. [2 ]
Zhang, J. B. [2 ]
Dong, S. Y. [3 ]
机构：
[1] Shenyang Univ Technol, Sch Mat Sci & Engn, Shenyang 110870, Liaoning, Peoples R China
[2] Shenyang Dalu Laser Technol CO LTD, Shenyang 110136, Liaoning, Peoples R China
[3] Army Acad Armored Forces, Natl Key Lab Remfg, Beijing 100072, Peoples R China
来源：
VACUUM | 2021年 / 191卷
关键词：
24CrNiMo low alloy steel; Selective laser melting; Laser melting deposition; Microstructure; Electron backscatter diffraction; STAINLESS-STEEL; EVOLUTION; STRENGTH; BEHAVIOR; DENSITY;
D O I：
10.1016/j.vacuum.2021.110394
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, microstructural features of 24CrNiMo low alloy steel fabricated by selective laser melting (SLM) and laser melting deposition (LMD) were characterized and compared using advanced electron microscopy and electron backscatter diffraction techniques. The results showed that the microstructures with different microstructure types, crystallographic orientations, grain boundaries, grain sizes, dislocations distributions and slip capabilities were observed due to rather different thermal histories between SLM and LMD processes. Such differences in the microstructure can definitely lead to different mechanical properties. This work can provide a reference for the process choice based on practical industrial applications.
引用
收藏
页数：6
相关论文
共 31 条
  • [21] Enhanced strength and corrosion resistance of Mg-Gd-Y-Zr alloy with ultrafine grains
    Wan, Yingchun
    Xu, Shiyuan
    Liu, Chuming
    Gao, Yonghao
    Jiang, Shunong
    Chen, Zhiyong
    [J]. MATERIALS LETTERS, 2018, 213 : 274 - 277
  • [22] Effects of process parameters on the microstructure and mechanical properties of 24CrNiMo steel fabricated by selective laser melting
    Wang, Qing
    Zhang, Zhihui
    Tong, Xin
    Dong, Shiyun
    Cui, Zhenquan
    Wang, Xi
    Ren, Luquan
    [J]. OPTICS AND LASER TECHNOLOGY, 2020, 128
  • [23] Microstructure and mechanical behavior of additive manufactured Cr-Ni-V low alloy steel in different heat treatment
    Wang, X.
    Zhang, C. H.
    Cui, X.
    Zhang, S.
    Chen, J.
    Zhang, J. B.
    [J]. VACUUM, 2020, 175 (175)
  • [24] Selective laser melting of 24CrNiMo steel for brake disc: Fabrication efficiency, microstructure evolution, and properties
    Wei, Mingwei
    Chen, Suiyuan
    Xi, Lianyun
    Liang, Jing
    Liu, Changsheng
    [J]. OPTICS AND LASER TECHNOLOGY, 2018, 107 : 99 - 109
  • [25] Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect
    Yan, Zhifeng
    Wang, Denghui
    He, Xiuli
    Wang, Wenxian
    Zhang, Hongxia
    Dong, Peng
    Li, Chenhao
    Li, Yuli
    Zhou, Jun
    Liu, Zhuang
    Sun, Liyong
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 723 : 212 - 220
  • [26] Additive manufacturing of trabecular tantalum scaffolds by laser powder bed fusion: Mechanical property evaluation and porous structure characterization
    Yang, Jingzhou
    Jin, Xia
    Gao, Hairui
    Zhang, Dachen
    Chen, Haishen
    Zhang, Shupei
    Li, Xiaopeng
    [J]. MATERIALS CHARACTERIZATION, 2020, 170
  • [27] Failure analysis of a crossing rail made of Hadfield steel after severe plastic deformation induced by wheel-rail interaction
    Zambrano, O. A.
    Tressia, G.
    Souza, R. M.
    [J]. ENGINEERING FAILURE ANALYSIS, 2020, 115
  • [28] Dynamic recrystallization study of a Fe-Mn-Si based shape memory alloy in constant and variable thermomechanical conditions
    Zarnbrano, O. A.
    Loge, Roland E.
    [J]. MATERIALS CHARACTERIZATION, 2019, 152 : 151 - 161
  • [29] Comparisons of 304 austenitic stainless steel manufactured by laser metal deposition and selective laser melting
    Zhang, Yimin
    Huang, Weibo
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2020, 57 : 324 - 333
  • [30] The effect of different scanning strategies on microstructural evolution to 24CrNiMo alloy steel during direct laser deposition
    Zhao, Xuan
    Dong, Shiyun
    Yan, Shixing
    Liu, Xiaoting
    Liu, YuXin
    Xia, Dan
    Lv, Yaohui
    He, Peng
    Xu, Binshi
    Han, Hongsheng
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 771
1234