Strength of adhesively bonded joints under mixed axial and shear loading

This study aims at optimising adhesive properties in an aluminium/structural epoxy assembly for different conditions of surface pre-treatment. We consider the mechanical behaviour and failure under proportional, multi-axial loading using an instrumented. Arcan-type test. Values of fracture strength were found to be dispersed (even for a given surface treatment). Typically dispersion was of the order of 15%. This statistical behaviour, also observed with a simple tensile test, seems to be related to the heterogeneous nature of the microstructure of the adhesive bond, which contains voids, as well as mineral particles for reinforcement. A statistical analysis is suggested for use in conjunction with a strength envelope in practical design, for cases when the stress distribution is significantly heterogeneous. It is believed that this approach may be developed in order to understand the well-known scatter of adhesion strength results, and thus contribute to better reliability assessment. (C) 2012 Elsevier Ltd. All rights reserved.