Pb-free solders based on SnAgCu, SnAgBi, SnAg and SnCu, fair wave soldering of electronic assemblies

被引:0
|
作者
Biglari, MH [1 ]
Oddy, M [1 ]
Oud, MA [1 ]
Davis, P [1 ]
de Kluizenaar, EE [1 ]
Langeveld, P [1 ]
Schwarzbach, D [1 ]
机构
[1] Cookson Elect, Alpha Fry Technol, European Res Ctr, NL-1410 AA Naarden, Netherlands
来源
ELECTRONICS GOES GREEN 2000 (PLUS): A CHALLENGE FOR THE NEXT MILLENNIUM, VOL 1, PROCEEDINGS | 2000年
关键词
D O I
暂无
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Pb-free wave soldering technology, using SnAgCu, SnAgBiSb and SnAg alloys, has been observed to be technically viable. These Pb-free solders are compatible with Cu-OSP, immersion Sri, immersion Ag and electroless Ni/Au board finishes. Mechanical and physical properties (expansion coefficient, E-modulus, strength, ductility, and melting temperature/range) were measured using TMA, DMTA tensile tests and DSC. CTE is slightly lower than that of Pb-containing solders. E-modulus and yield stress are larger than those of SnPb40 solder. The most important process parameters, solder bath temperature, contact time between board and solder wave and pre-heating temperature have been thoroughly investigated, and required values are presented. Extended process trials have been executed to verify that the process can run with the same yield as SnPb wave soldering. Thermomechanical fatigue life of Pb-free soldered joints has been investigated with temperature cycling tests. It was shown that the fatigue life of most lead-free soldered joints is at least equal to that of SnPb40. SnBiAgSb joints have an even longer fatigue life by a factor of 1.5-2, depending on component type. SnCu joints have a fatigue life of only 0.5-0.6 times that of SnPb joints.
引用
收藏
页码:73 / 82
页数:10
相关论文
共 50 条
  • [1] Effect of flux on the wetting characteristics of SnAg, SnCu, SnAgBi, and SnAgCu lead-free solders on copper substrates
    Mario F. Arenas
    Min He
    Viola L. Acoff
    Journal of Electronic Materials, 2006, 35 : 1530 - 1536
  • [2] Effect of flux on the wetting characteristics of SnAg, SnCu, SnAgBi, and SnAgCu lead-free solders on copper substrates
    Arenas, Mario F.
    He, Min
    Acoff, Viola L.
    JOURNAL OF ELECTRONIC MATERIALS, 2006, 35 (07) : 1530 - 1536
  • [3] Reliability of Pb-free solders for harsh environment electronic assemblies
    Desmarest, S. Godard
    MATERIALS SCIENCE AND TECHNOLOGY, 2012, 28 (03) : 257 - 273
  • [4] Recent progress in Pb-free solders and soldering technologies
    Sung K. Kang
    JOM, 2001, 53 : 16 - 16
  • [5] Dynamics in Pb-free wave soldering
    Celestica Corp.
    不详
    不详
    Circ Assem, 2006, 2 (76-83):
  • [6] Evaluation of Pb-free Solders for adaptability to various soldering processes
    Tsunematsu, Y
    Tanigami, M
    Hirano, M
    FIRST INTERNATIONAL SYMPOSIUM ON ENVIRONMENTALLY CONSCIOUS DEGIGN AND INVERSE MANUFACTURING, PROCEEDINGS, 1999, : 610 - 614
  • [7] Pb-free surface-finishing on electronic components' terminals for Pb-free soldering assembly
    Tanaka, H
    Tanimoto, M
    Matsuda, A
    Uno, T
    Kurihara, M
    Shiga, S
    JOURNAL OF ELECTRONIC MATERIALS, 1999, 28 (11) : 1216 - 1223
  • [8] Pb-free surface-finishing on electronic components’ terminals for Pb-free soldering assembly
    Hitoshi Tanaka
    Morimasa Tanimoto
    Akira Matsuda
    Takeo Uno
    Masaaki Kurihara
    Shoji Shiga
    Journal of Electronic Materials, 1999, 28 : 1216 - 1223
  • [9] High performance Pb-free solder for wave soldering
    Murai, J
    Izuta, G
    Sakagami, Y
    Murakami, K
    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 1015 - 1018
  • [10] Poor hole-filling with Pb-free wave soldering?
    Vitronics Soltec
    Circ Assem, 2006, 7 (54):