Diffusion bonding of titanium to 304 stainless steel

Diffusion bonding between commercially pure titanium and an austenitic stainless steel (AISI 304) has been carried out in the temperature range of 850-950 degreesC for 2 h at uniaxial pressure of 3 MPa in vacuum. The microstructure of the diffusion zone has been analysed by optical and scanning electron microscopy (SEM). The interdiffusion of the diffusing species across the interface has been evaluated by electron probe microanalysis (EPMA). The reaction products formed at the interface have been identified by X-ray diffraction technique. It has been observed that the diffusion zone is dominated by the presence of the a phase close to the stainless steel side and the solid solution of beta-Ti (solutes are Fe, Cr and Ni) close to the titanium. The presence of Fe2Ti and FeTi has been found in the reaction zone. It has been observed that the bond strength (similar to222 MPa) is highest for the couple processed at 850 degreesC and this value decreases with rise in joining temperature. The variation of strength of the transition joints is co-related with the microstructural characteristics of the diffusion zone. (C) 2003 Elsevier B.V. All rights reserved.