Cycle-based optimal NOx emission control of selective catalytic reduction systems with dynamic programming algorithm

被引:32
|
作者
Zhang, Hui [1 ]
Chen, Yan [1 ]
Wang, Junmin [1 ]
Yang, Shichun [2 ]
机构
[1] Ohio State Univ, Dept Mech & Aerosp Engn, Columbus, OH 43210 USA
[2] Beihang Univ, Sch Transportat Sci & Engn, Beijing 100191, Peoples R China
关键词
NOx reduction; Selective catalytic reduction (SCR); Ammonia coverage ratio optimization; Dynamic programming; PREDICTIVE CONTROL; CONVERTER SYSTEM; POWER MANAGEMENT; SCR; DIESEL; EXHAUST; STRATEGY; DESIGN;
D O I
10.1016/j.fuel.2014.10.051
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
In this work, we investigate the cycle-based optimal NOx emission control for Diesel engine selective catalytic reduction (SCR) systems. The optimization is carried out based on the SCR model and the SCR is assumed to be a continuous stirred tank reactor during the modeling. Considering the main chemical reactions inside an SCR cell, a three-state nonlinear model is obtained and the system parameters are determined by using the experimental data. The states of the nonlinear model consist of the NOx concentration, the ammonia concentration, and the ammonia coverage ratio. Though there are considerable works on the SCR dosing control in the literature, the optimal control strategy applied to the SCR systems has been rarely studied. The global optimality in the SCR dosing control can be used as a benchmark and evaluate the performance of other designed controllers. Moreover, it can be employed to find the limit of NOx conversion efficiency of a specific SCR aftertreatment system and select the minimal volume of the SCR catalyst cell. Therefore, it is quite meaningful to study the optimal NOx emission control of SCR systems via the dynamic programming approach. For the optimization, the challenges arise from the following aspects: (1) Due to the system stiffness, we cannot find an equivalent discrete-time model for the traditional dynamic programming, that is, the traditional dynamic programming algorithm is not applicable. (2) The computational load is relatively too heavy and a personal PC is not affordable. To deal with the existing challenges, we propose the dynamic programming algorithm based on the continuous-time SCR model. The computational load is adjustable in terms of the accuracy. The proposed algorithm is then applied to the SCR system for the NOx emission reduction. And the algorithm validation is carried out based on the US06 test cycle. It infers from the optimization results and the comparison, the prescribed ammonia slip constraint is satisfied and the tailpipe NOx emission is optimized. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:200 / 206
页数:7
相关论文
共 50 条
  • [31] Removal of NOx with Selective Catalytic Reduction Based on Nonthermal Plasma Preoxidation
    Guan, Bin
    Lin, He
    Cheng, Qi
    Huang, Zhen
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2011, 50 (09) : 5401 - 5413
  • [32] Heating Control Strategy Based on Dynamic Programming for Building Energy Saving and Emission Reduction
    Qin, Haosen
    Yu, Zhen
    Li, Tailu
    Liu, Xueliang
    Li, Li
    INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH, 2022, 19 (21)
  • [33] Investigation on ammonia removal efficiency of selective catalytic reduction based emission control system
    Kurien C.
    Kumar Srivastava A.
    Thakkar V.
    Sharma V.
    Srivastav S.
    Siva Prasanna Sanka R.V.
    Materials Today: Proceedings, 2022, 68 : 862 - 866
  • [34] Zeolite-based materials for the selective catalytic reduction of NOx with hydrocarbons
    Traa, Y
    Burger, B
    Weitkamp, J
    MICROPOROUS AND MESOPOROUS MATERIALS, 1999, 30 (01) : 3 - 41
  • [35] Dynamic Programming based Optimal Control of Discrete Time Switched Linear Systems
    Augustine, Midhun T.
    Patil, Deepak U.
    2019 AUSTRALIAN & NEW ZEALAND CONTROL CONFERENCE (ANZCC), 2019, : 221 - 224
  • [36] CONTROL OF NOX EMISSIONS BY SELECTIVE CATALYTIC REDUCTION WITH HYDROGEN OVER HYDROPHOBIC CATALYSTS
    FU, L
    CHUANG, KT
    ENERGY & FUELS, 1989, 3 (06) : 740 - 743
  • [37] Morphology control of manganese-based catalysts for low-temperature selective catalytic reduction of NOx
    Jiang, Haoxi
    Wang, Yaodong
    Zhou, Jiali
    Chen, Yifei
    Zhang, Minhua
    MATERIALS LETTERS, 2018, 233 : 250 - 253
  • [38] A multiple model-based controller for NOx reduction in a Selective Catalytic Reduction system
    Zambrano, Darine
    Tayamon, Soma
    2013 EUROPEAN CONTROL CONFERENCE (ECC), 2013, : 1970 - 1975
  • [39] Optimal Control Algorithm Of A Dynamic Continuous Systems
    Xing Jinsheng
    MATERIALS, MECHATRONICS AND AUTOMATION, PTS 1-3, 2011, 467-469 : 1657 - 1661
  • [40] Pareto optimal control of the mean-field stochastic systems by adaptive dynamic programming algorithm
    Ge, Yingying
    Liu, Xikui
    Li, Yan
    ISA TRANSACTIONS, 2020, 102 (102) : 81 - 90