Cycle-based optimal NOx emission control of selective catalytic reduction systems with dynamic programming algorithm

被引:32
|
作者
Zhang, Hui [1 ]
Chen, Yan [1 ]
Wang, Junmin [1 ]
Yang, Shichun [2 ]
机构
[1] Ohio State Univ, Dept Mech & Aerosp Engn, Columbus, OH 43210 USA
[2] Beihang Univ, Sch Transportat Sci & Engn, Beijing 100191, Peoples R China
关键词
NOx reduction; Selective catalytic reduction (SCR); Ammonia coverage ratio optimization; Dynamic programming; PREDICTIVE CONTROL; CONVERTER SYSTEM; POWER MANAGEMENT; SCR; DIESEL; EXHAUST; STRATEGY; DESIGN;
D O I
10.1016/j.fuel.2014.10.051
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
In this work, we investigate the cycle-based optimal NOx emission control for Diesel engine selective catalytic reduction (SCR) systems. The optimization is carried out based on the SCR model and the SCR is assumed to be a continuous stirred tank reactor during the modeling. Considering the main chemical reactions inside an SCR cell, a three-state nonlinear model is obtained and the system parameters are determined by using the experimental data. The states of the nonlinear model consist of the NOx concentration, the ammonia concentration, and the ammonia coverage ratio. Though there are considerable works on the SCR dosing control in the literature, the optimal control strategy applied to the SCR systems has been rarely studied. The global optimality in the SCR dosing control can be used as a benchmark and evaluate the performance of other designed controllers. Moreover, it can be employed to find the limit of NOx conversion efficiency of a specific SCR aftertreatment system and select the minimal volume of the SCR catalyst cell. Therefore, it is quite meaningful to study the optimal NOx emission control of SCR systems via the dynamic programming approach. For the optimization, the challenges arise from the following aspects: (1) Due to the system stiffness, we cannot find an equivalent discrete-time model for the traditional dynamic programming, that is, the traditional dynamic programming algorithm is not applicable. (2) The computational load is relatively too heavy and a personal PC is not affordable. To deal with the existing challenges, we propose the dynamic programming algorithm based on the continuous-time SCR model. The computational load is adjustable in terms of the accuracy. The proposed algorithm is then applied to the SCR system for the NOx emission reduction. And the algorithm validation is carried out based on the US06 test cycle. It infers from the optimization results and the comparison, the prescribed ammonia slip constraint is satisfied and the tailpipe NOx emission is optimized. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:200 / 206
页数:7
相关论文
共 50 条
  • [1] Cycle-based Optimal Emission Control of Diesel Engine Selective Catalyst Reduction Systems
    Zhang, Hui
    Chen, Yan
    Wang, Junmin
    Wang, Yue-Yun
    2014 11TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION (WCICA), 2014, : 1980 - 1984
  • [2] A Stochastic Dynamic Programming Approach to Selective Catalytic Reduction Control
    Hendrickson, Cory
    Upadhyay, Devesh
    Van Nieuwstadt, Michiel
    2017 AMERICAN CONTROL CONFERENCE (ACC), 2017, : 5373 - 5378
  • [3] NOX selective catalytic reduction control based on simple models
    Dolanc, G
    Strmcnik, S
    Petrovcic, J
    JOURNAL OF PROCESS CONTROL, 2001, 11 (01) : 35 - 51
  • [4] A Computational Investigation of Industrial Selective Catalytic Reduction Systems for NOx Control
    Ogidiama, Oghare Victor
    Shamim, Tariq
    JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 2018, 140 (08):
  • [5] Multiobjective Optimal Design of a Lean NOx Trap and Urealess Selective Catalytic Reduction Aftertreatment System under a Control Algorithm
    Kim, Yeonsoo
    Park, Taekyoon
    Jung, Changho
    Kim, Chang Hwan
    kim, Yong Wha
    Lee, Jong Min
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2018, 57 (49) : 16772 - 16781
  • [6] Optimal Control of Complex Systems Based on Improved Dual Heuristic Dynamic Programming Algorithm
    Li, Hui
    Wen, Yongsui
    Sun, Wenjie
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2017, 2017
  • [7] Optimal control of hybrid systems based on dynamic programming
    Yin, ZS
    Li, P
    PROCEEDINGS OF THE 2001 AMERICAN CONTROL CONFERENCE, VOLS 1-6, 2001, : 880 - 881
  • [8] Flow modeling for a simple cycle turbine equipped with selective catalytic reduction system for NOX control
    Nguyen, Khoa
    Fadda, Dani
    Buzanowski, Mark
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE, VOL 2, 2005, : 737 - 740
  • [9] Towards optimal operation of sequential NOx storage and reduction and selective catalytic reduction
    Li, Mengmeng
    Easterling, Vencon G.
    Harold, Michael P.
    APPLIED CATALYSIS B-ENVIRONMENTAL, 2016, 184 : 364 - 380
  • [10] Nonlinear Dynamic Soft-Sensing Modeling of NOx Emission of a Selective Catalytic Reduction Denitration System
    Wu, Xiuliang
    Yu, Xiaodong
    Xu, Rui
    Cao, Maoyong
    Sun, Kai
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2022, 71