EBSD study of solidification characteristics of austenitic stainless steel weld pool

被引：13

作者：

Huang, Y. M. ^{[1
]}

Wu, Y. M. ^{[2
]}

Pan, C. X. ^{[1
]}

机构：

[1] Wuhan Univ, Dept Phys, Wuhan 430072, Hubei, Peoples R China

[2] Wuhan Iron & Steel Grp Co, Wuhan 430081, Hubei, Peoples R China

来源：

MATERIALS SCIENCE AND TECHNOLOGY | 2010年 / 26卷 / 06期

关键词：

Austenitic stainless steel; Weld; EBSD; Orientation relationship; METAL; GRAIN; ORIENTATION; BOUNDARY; CRACKING;

D O I：

10.1179/174328409X405607

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This present paper studied the solidification characteristics of a high Fe-Cr-Ni austenitic stainless steel weld pool using an EBSD system. The results revealed that the crystallography of the weld metal grains was affected by both the heat affected zone (HAZ) base metal grains at the fusion boundary and the thermal condition in weld pool. It exhibited an orientation relationship of < 100 > parallel to < 100 > and {100} parallel to {100} between the HAZ base metal and weld metal along the fusion boundary, which was resulted from the epitaxial growth in the weld pool. Additionally, a high fibre texture < 100 > toward the weld centreline was determined by the effect of the competitive mechanism at the beginning of the weld solidification.

引用

页码：750 / 753

页数：4

共 16 条

[1] Fatigue crack propagation in austenitic stainless steel weldments
Al-Haidary, J. T.
Wahab, A. A.
Salam, E. H. Abdul
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (11): : 3205 - 3214
[2] Evaluation of initial corrosion location in E316L austenitic stainless steel weld metals
Cui, Y
Lundin, CD
[J]. MATERIALS LETTERS, 2005, 59 (12) : 1542 - 1546
[3] FOLKHARD E, 2003, WELDING METALLURGY S, P1
[4] Review - Grain and subgrain characterisation by electron backscatter diffraction
Humphreys, FJ
[J]. JOURNAL OF MATERIALS SCIENCE, 2001, 36 (16) : 3833 - 3854
[5] Texture in hot rolled austenite and resulting transformation products
Hutchinson, B
Ryde, L
Lindh, E
Tagashira, K
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 257 (01): : 9 - 17
[6] Microporosity formation in partially melted zone during welding of high nitrogen austenitic stainless steels
Kamiya, O
Chen, ZW
Kikuchi, Y
[J]. JOURNAL OF MATERIALS SCIENCE, 2002, 37 (12) : 2475 - 2481
[7] On the orientations of abnormally grown grains in nanocrystalline Ni and Ni-Fe
Klement, U.
da Silva, M.
Skrotzki, W.
[J]. JOURNAL OF MICROSCOPY, 2008, 230 (03) : 455 - 463
[8] Pitting and stress corrosion cracking behavior in welded austenitic stainless steel
Lu, BT
Chen, ZK
Luo, JL
Patchett, BM
Xu, ZH
[J]. ELECTROCHIMICA ACTA, 2005, 50 (06) : 1391 - 1403
[9] Modelling the grain orientation of austenitic stainless steel multipass welds to improve ultrasonic assessment of structural integrity
Moysan, J
Apfel, A
Corneloup, G
Chassignole, B
[J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2003, 80 (02) : 77 - 85
[10] Nelson TW, 1999, WELD J, V78, p329S

← 1 2 →