Vapor Shield Models for Fusion Reactors Plasma-Facing Components

Radiant heat flux is a dominant mechanism by which energy transfers from the high-temperature core plasma to the interior critical components of the fusion reactor, which result in surface ablation and sever damage to the components. A vapor layer develops at the surface and provides a self-shielding mechanism at the plasma-material interface. Two models for the energy transmission factor through the boundary layer were developed and incorporated in the electrothermal plasma capillary code to predict the effectiveness of these models in surface self-protection. The electrothermal plasma capillary discharge simulates the typical conditions of fusion reactors disruption and quench phase and has been shown to be an adequate technique to evaluate the erosion of plasma-facing component. First model treats the radiant heat transport as it is affected by the variation of the plasma opacity, in which the vapor shield efficiency depends on the plasma optical thickness and the mean plasma opacity. The second model defines the vapor shield by the ratio of the energy reaching the surface to the total radiant energy emitted by the plasma with the inclusion of the plasma kinetic energy. The code can predict the axial and temporal variation of the transmission factor at each time step and mesh point, and predicts the plasma parameters with the effectiveness of the vapor shield at the boundary layer. The code prediction with implementation of both models has been used to compare the results with earlier ones and with some experimental data. Code results are in good correlation with experimentally measured ablation data.