Grain refinement and wear properties evaluation of aluminum alloy 2014 matrix-TiB2 in-situ composites

被引：60
|
作者：
Mallikarjuna, C. [1 ]
Shashidhara, S. M. [2 ]
Mallik, U. S. [3 ]
Parashivamurthy, K. I. [3 ]
机构：
[1] Al Jabal Al Garbhi Univ, Fac Engn, Gharyan, India
[2] Kalpataru Inst Technol, Tiptur, Karnataka, India
[3] Siddaganga Inst Technol, Tumkur, Karnataka, India
来源：
MATERIALS & DESIGN | 2011年 / 32卷 / 06期
关键词：
POWDER-METALLURGY; ELEVATED-TEMPERATURES; MECHANICAL-PROPERTIES; SPRAY-DEPOSITION; TIB2; PARTICLES; BEHAVIOR; MICROSTRUCTURE; FABRICATION; DISPERSION; TENSILE;
D O I：
10.1016/j.matdes.2011.01.036
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A salt base exothermic reaction process has been employed to produce aluminum alloy 2014 matrix-TiB2 composites using an exothermic reaction process at 850 degrees C using K2TiF6 and KBF4 salts. The period of exothermic reaction was varied from a minimum of 15 min to a maximum of 45 min to investigate the relationship between the degree of reaction and the growth behavior of TiB2 formed. These have been compared with commercially available aluminum alloy 2014 material. Structural and wear properties have been measured. These show that TiB2 is extremely effective in enhancing wear properties in addition to significantly reducing the coefficient of friction. The microstructure and phase composition of the materials obtained were studied using X-ray diffraction and scanning electron microscopy (SEM). Very fine ceramic particles were obtained in the aluminum alloy matrix. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：3554 / 3559
页数：6
相关论文
共 50 条
  • [1] Microstructure and Mechanical Properties of Aluminum Matrix Composites Reinforced With In-Situ TiB2 Particles
    Wu, Weiguo
    Zeng, Tiancheng
    Hao, Wenfeng
    Jiang, Shiping
    FRONTIERS IN MATERIALS, 2022, 9
  • [2] Tailoring in-situ TiB2 particulates in aluminum matrix composites
    Liu, X.
    Liu, Y.
    Huang, D.
    Han, Q.
    Wang, X.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 705 : 55 - 61
  • [3] Microstructure and mechanical properties of extruded TiB2/2024 aluminum matrix composites
    Hua, Guangxin
    Ran, Linghao
    Zhang, Shuaibo
    Su, Yong
    MATERIALS RESEARCH EXPRESS, 2023, 10 (01)
  • [4] Abrasive Wear Behaviour of TiB2 Reinforced In-Situ Synthesized Magnesium RZ5 Alloy based Metal Matrix Composites
    Meher, Arabinda
    Mahapatra, Manas Mohan
    Samal, Priyaranjan
    Vundavilli, Pandu R.
    METALS AND MATERIALS INTERNATIONAL, 2021, 27 (09) : 3652 - 3665
  • [5] Processing, microstructure and mechanical properties of in-situ Al-TiB2 metal matrix composites
    Sengupta, Barnali
    Mallick, Amitava Basu
    MATERIALS TODAY-PROCEEDINGS, 2022, 67 : 351 - 357
  • [6] Wear testing of in situ cast AA8011-TiB2 metal matrix composites
    Selvan, Bellamballi Munivenkatappan Muthamizh
    Anandakrishnan, Veeramani
    Duraiselvam, Muthukannan
    Sundarameenakshi, Sivaraj
    MATERIALS TESTING, 2019, 61 (08) : 779 - 786
  • [7] Effect of TiB2 Content on Microstructure and Properties of In-situ TiB2/2219 Aluminum Matrix Composites
    Chen S.
    Wang D.
    Chen S.
    Chen K.
    Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences, 2022, 49 (12): : 108 - 114
  • [8] In Situ Formation of ZrB2 and Its Influence on Wear and Mechanical Properties of ADC12 Alloy Mixed Matrix Composites
    Prasad, Lalta
    Kumar, Niteesh
    Yadav, Anshul
    Kumar, Anil
    Kumar, Virendra
    Winczek, Jerzy
    MATERIALS, 2021, 14 (09)
  • [9] Wear Behaviour of Squeeze-Cast Al 2014 Alloy and In-Situ 5 vol% TiB2/2014 Composite
    Xue, J.
    Wang, J.
    Han, Y. F.
    Sun, B. D.
    MATERIALS TRANSACTIONS, 2012, 53 (12) : 2119 - 2128
  • [10] Friction and wear properties of in-situ synthesized Al2O3 reinforced aluminum composites
    Jiang, Xiao-song
    Wang, Nai-juan
    Zhu, De-gui
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (07) : 2352 - 2358
12345