Surface coating on carbon nanofibers with alumina precursor by different synthesis routes

被引：22

作者：

Borrell, A. ^{[1
]}

Rocha, V. G. ^{[2
]}

Torrecillas, R. ^{[1
]}

Fernandez, A. ^{[2
]}

机构：

[1] Univ Oviedo, CSIC, CINN, Llanera 33428, Asturias, Spain

[2] Fdn ITMA, Llanera 33428, Asturias, Spain

来源：

COMPOSITES SCIENCE AND TECHNOLOGY | 2011年 / 71卷 / 01期

关键词：

Nano composites; Carbon fibres; Coating; Mechanical properties; Spark plasma sintering; MECHANICAL-PROPERTIES; CERAMIC-MATRIX; FABRICATION; NANOTUBES; NANOCOMPOSITES; POWDER; MICROSTRUCTURE; TEMPERATURE; COMPOSITES;

D O I：

10.1016/j.compscitech.2010.09.011

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

Alumina-reinforced carbon nanofiber nanocomposites were prepared using different routes; powders mixture, colloidal route and sol-gel process followed by spark plasma sintering (SPS). CNFs/xAl(2)O(3) (x = 10-50 vol.%) were prepared through nanopowders mixing in a high-energy attrition milling. The main limitations in the preparation of this kind of nanocomposites are related to the difficulty in obtaining materials with a homogeneous distribution of both phases and the different chemical nature of CNFs and Al2O3, which causes poor interaction between them. A surface coating of CNFs by wet chemical routes with an alumina precursor is proposed as a very effective way to improve the interaction between CNFs and Al2O3. An improvement of 50% in fracture strength was found for similar nanocomposite compositions when the surface coating was used. The improved mechanical properties of these nanocomposites are caused by stronger interaction between the CNFs and Al2O3. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.

引用

页码：18 / 22

页数：5

共 32 条

[21] Carbon nanofiber-reinforced alumina nanocomposites: Fabrication and mechanical properties [J].

Maensiri, Santi ;

Laokul, Paveena ;

Klinkaewnarong, Jutharatana ;

Amornkitbamrung, Vittaya .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 447 (1-2) :44-50

[22] Stress graphitization of C/C composite reinforced by carbon nanofiber [J].

Matsui, K ;

Lanticse, LJ ;

Tanabe, Y ;

Yasuda, E ;

Endo, M .

CARBON, 2005, 43 (07) :1577-1579

[23] Mechanical synthesis of nanocrystalline alpha-Al2O3 seeds for enhanced transformation kinetics [J].

Panchula, ML ;

Ying, JY .

NANOSTRUCTURED MATERIALS, 1997, 9 (1-8) :161-164

[24] Alumina nanocomposites from powder-alkoxide mixtures [J].

Schehl, M ;

Díaz, LA ;

Torrecillas, R .

ACTA MATERIALIA, 2002, 50 (05) :1125-1139

[25] High density carbon fiber/boron nitride matrix composites: Fabrication of composites with exceptional wear resistance [J].

Seghi, S ;

Lee, J ;

Economy, J .

CARBON, 2005, 43 (10) :2035-2043

[26]

SHACKELFORD JF, 2001, MAT SCI ENG HDB, P959

[27] Economical synthesis of nano alumina powder using an aqueous sol-gel method [J].

Shojaie-Bahaabad, M. ;

Taheri-Nassaj, E. .

MATERIALS LETTERS, 2008, 62 (19) :3364-3366

[28] Mechanical behavior of polymer and ceramic matrix nanocomposites [J].

Siegel, RW ;

Chang, SK ;

Ash, BJ ;

Stone, J ;

Ajayan, PM ;

Doremus, RW ;

Schadler, LS .

SCRIPTA MATERIALIA, 2001, 44 (8-9) :2061-2064

[29] Development of a dispersion process for carbon nanotubes in ceramic matrix by heterocoagulation [J].

Sun, J ;

Gao, L .

CARBON, 2003, 41 (05) :1063-1068

[30] Multiwalled carbon nanotube monoliths prepared by spark plasma sintering (SPS) and their mechanical properties [J].

Uo, Motohiro ;

Hasegawa, Tomoka ;

Akasaka, Tsukasa ;

Tanaka, Isao ;

Munekane, Fuminori ;

Omori, Mamoru ;

Kimura, Hisamichi ;

Nakatomi, Reiko ;

Soga, Kohei ;

Kogo, Yasuo ;

Watari, Fumio .

BIO-MEDICAL MATERIALS AND ENGINEERING, 2009, 19 (01) :11-17

← 1 2 3 4 →