Properties of ZrO2-Al2O3 composite as a function of isothermal holding time

Zirconia and alumina based ceramics present interesting properties for their application as implants, such as biocompatibility, good fracture resistance, as well as high fracture toughness and hardness. In this work the influence of sintering time on the properties of a ZrO2-Al2O3 composite material, containing 20 wt% of Al2O3, has been investigated. The ceramic composites were obtained by sintering, in air, at 1600 degrees C for sintering times between 0 and 1440 min. Sintered samples were characterized by microstructure and crystalline phases. as well as by mechanical properties. The grain growth exponents, n, for the ZrO2, and Al2O3 were 2.8 and 4.1, respectively, indicating that different mechanisms are responsible for grain growth of each phase. After sintering at 1600 degrees C, the material exhibited a dependency of hardness as function of sintering time, with hardness values between 1500 HV (120 min) and 13 10 HV (1440 min) and a fracture touLyhriess of 8 MPa m(1/2), which makes it suitable for bioapplications, such as dental implants. (C) 2007 Elsevier Ltd. All riahts reserved.