Mechanical and thermal properties of fly ash based geopolymers

被引：172

作者：

Fan, Fenghong ^{[1
]}

Liu, Zhen ^{[1
]}

Xu, Guoji ^{[1
]}

Peng, Hui ^{[1
,2
]}

Cai, C. S. ^{[1
]}

机构：

[1] Louisiana State Univ, Dept Civil & Environm Engn, Baton Rouge, LA 70803 USA

[2] Changsha Univ Sci & Technol, Dept Civil & Architecture Engn, Changsha 410076, Hunan, Peoples R China

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2018年 / 160卷

关键词：

Thermal; Mechanical; Heating; Fly ash; Geopolymer; Microstructure; FIRE RESISTANCE APPLICATIONS; BLAST-FURNACE SLAG; CONCRETE; BEHAVIOR; TEMPERATURE; ACTIVATOR; STRENGTH; CEMENT;

D O I：

10.1016/j.conbuildmat.2017.11.023

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The traditional cement industry consumes a large quantity of energy and emits greenhouse gas CO2. With the promotion of sustainable development, attentions have been drawn to how to develop a "green" material with similar or even better engineering properties than ordinary Portland cement (OPC), and geopolymer has been recognized as one of the most promising materials. In this study, an experimental investigation on the thermo-mechanical properties of geopolymers prepared using a class F fly ash, KOH and Na2SiO3 is presented. Based on the testing results, the effects of water/ash ratio, curing methods, cooling methods, and sealing degree on the compressive strength and thermal properties of the geopolymer products are studied. The tested results show that the geopolymer cured at appropriate conditions can reach a compressive strength of more than 100 MPa and a good residual strength (up to 96 MPa) after 500 degrees C heating. The geopolymer sample with a water/ash ratio of 0.2 shrinks 2.0% in the longitudinal direction after 500 degrees C heating, while expanses 9.4% after 800 degrees C heating. In addition, it is found that the studied geopolymer possesses good spallation resistance when cooled down in water after high temperature heating. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：66 / 81

页数：16

共 25 条

[1] Geopolymeric materials prepared using Class F fly ash and elevated temperature curing [J].

Bakharev, T .

CEMENT AND CONCRETE RESEARCH, 2005, 35 (06) :1224-1232

[2] Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing [J].

Bakharev, T .

CEMENT AND CONCRETE RESEARCH, 2006, 36 (06) :1134-1147

[3] Synthesis and thermal behaviour of potassium sialate geopolymers [J].

Barbosa, VFF ;

MacKenzie, KJD .

MATERIALS LETTERS, 2003, 57 (9-10) :1477-1482

[4] Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate [J].

Barbosa, VFF ;

MacKenzie, KJD .

MATERIALS RESEARCH BULLETIN, 2003, 38 (02) :319-331

[5] Fire-resistant geopolymer produced by granulated blast furnace slag [J].

Cheng, TW ;

Chiu, JP .

MINERALS ENGINEERING, 2003, 16 (03) :205-210

[6] Thermal Resistance Variations of Fly Ash Geopolymers: Foaming Responses [J].

Cheng-Yong, Heah ;

Yun-Ming, Liew ;

Abdullah, Mohd Mustafa Al Bakri ;

Hussin, Kamarudin .

SCIENTIFIC REPORTS, 2017, 7

[7]

Davidovits J, 1988, GEOPOLYMER, P25

[8]

Davidovits J., 2020, Geopolymer: Chemistry Applications, V5th ed.

[9] The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature [J].

Deb, Partha Sarathi ;

Nath, Pradip ;

Sarker, Prabir Kumar .

MATERIALS & DESIGN, 2014, 62 :32-39

[10] Geopolymer technology:: the current state of the art [J].

Duxson, P. ;

Fernandez-Jimenez, A. ;

Provis, J. L. ;

Lukey, G. C. ;

Palomo, A. ;

van Deventer, J. S. J. .

JOURNAL OF MATERIALS SCIENCE, 2007, 42 (09) :2917-2933

← 1 2 3 →