Recent advances in utilization of graphene for filtration and desalination of water: A review

被引:201
作者
Aghigh, Arash [1 ]
Alizadeh, Vahid [1 ]
Wong, H. Y. [1 ]
Islam, Md. Shabiul [2 ,3 ]
Amin, Nowshad [3 ]
Zaman, Mukter [1 ]
机构
[1] Multimedia Univ, Fac Engn FOE, Cyberjaya 63100, Malaysia
[2] UKM, Inst Microengn & Nanoelect IMEN, Bangi 43600, Selangor, Malaysia
[3] Univ Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia
关键词
Graphene; Water desalination; Nanoporous graphene; CDI; Nanopores; RGO; Graphene oxide; GO sieve; ENHANCED CAPACITIVE DEIONIZATION; POROUS CARBON; WASTE-WATER; ELECTRODES; PERFORMANCE; REMOVAL; NACL;
D O I
10.1016/j.desal.2015.03.024
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Water as a basic necessity is an influential factor in our everyday lives but water pollution, urbanization, and huge population growth has led humankind to the brink of water resource scarcity. To address this issue, water filtration as well as desalination got enormous interest by the research community. Recently graphene, a new two dimensional material with exceptional capabilities and characteristics, has become apposite in the field of water filtration and desalination. This paper reviews the recent progress in Graphene research for water desalination using novel methods such as Nanoporous Graphene (NG) sheets as well as Capacitive Deionization (CDI) method. Among which most promising uniform NG sheets can be used for water filtration and desalination at a removal efficiency of 33-100% depending on the pore size as well as the applied pressure [1] and has a water flow rate of 10-100 L/cm(2)/day/MPa [1] and by adjusting the pore size, different mineral filtrations can take place [1]. The main drawback which limits the widespread utilization of NG is the mechanical stability of NG sheets as the pore number increases since water permeability is directly proportional to the number of pores, pore distribution as well as the mass production of graphene sheets which has not been solved [1,2]. Apart from this, in CDI method, filtration is done by applying a certain potential difference between arrays of paired electrodes. The mentioned CDI method has moderate removal efficiency but has higher energy efficiency compared to the reverse osmosis method due to minimal energy requirement of only 0.1-2.03 kWh/m(3) [3]. Graphene oxide based desalination is another emerging desalination method which is gaining popularity because of its ease of fabrication, industry scale production, and strong mechanical stability 14,5]. It uses the "ion sponging" effect and can block hydrated ions with a radius greater than 4.5 angstrom. But still this method should be further improved as small seawater salts are able to pass from the GO sieve 16,7]. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:389 / 397
页数:9
相关论文
共 59 条
  • [1] Application of Capacitive Deionisation in water desalination: A review
    AlMarzooqi, Faisal A.
    Al Ghaferi, Amal A.
    Saadat, Irfan
    Hilal, Nidal
    [J]. DESALINATION, 2014, 342 : 3 - 15
  • [2] [Anonymous], TO RID WAT SALT MIT
  • [3] Ayre J., GRAPHENES GREAT WATE
  • [4] Bennington-Castro J., STEP CLOSER GRAPHENE
  • [5] NOMENCLATURE AND TERMINOLOGY OF GRAPHITE-INTERCALATION COMPOUNDS
    BOEHM, HP
    SETTON, R
    STUMPP, E
    [J]. CARBON, 1986, 24 (02) : 241 - 245
  • [6] Recent advances in the use of graphene-family nanoadsorbents for removal of toxic pollutants from wastewater
    Chowdhury, Shamik
    Balasubramanian, Rajasekhar
    [J]. ADVANCES IN COLLOID AND INTERFACE SCIENCE, 2014, 204 : 35 - 56
  • [7] Cohen-Tanugi D., 2013, TECHN SUST 2013 1 IE
  • [8] Cohen-Tanugi D., 2014, J. Chem. Phys, V141
  • [9] Water Desalination across Nanoporous Graphene
    Cohen-Tanugi, David
    Grossman, Jeffrey C.
    [J]. NANO LETTERS, 2012, 12 (07) : 3602 - 3608
  • [10] Dickie P., 2007, OPTION DISTRACTION T