The effect of tamping conditions on undrained shear strengths of a non-plastic sandy silt tailings

A series of direct simple shear (DSS) tests were carried out on a non-plastic sandy silt lead-zinc-silver tailings to develop a relationship between undrained shearing behaviour and density for contractive states. The critical state line was also obtained through triaxial compression tests to enable the DSS tests to be viewed in a critical state framework and allow comparison with in situ testing. It was found that the gravimetric water content (GWC) used to tamp the specimens had a significant effect on the resulting undrained strengths when attempting to achieve dense states - with higher GWC giving lower strength at a given density than a lower GWC. Intact and slurry deposited (SD) samples were also tested to access denser states without inducing tamping-related stresses. These showed a more consistent trend with the loose-tamped specimens, and with other data from the literature. Plausible explanations as to the causes of the increased strength of dense-tamped samples were obtained through estimating potential preconsolidation stresses and "locked in" horizontal stresses that may occur from dense tamping. The importance of these observations on the development of density- strength profiles in engineering practice was outlined.