Impact of fibre factor and temperature on the mechanical properties of blended fibre-reinforced cementitious composite

被引：7

作者：

Liu, Liang ^{[1
,2
]}

Yang, Gui ^{[3
]}

He, Jianxin ^{[1
,2
]}

Liu, Hanlong ^{[1
,3
]}

Gong, Jingwei ^{[1
,2
]}

Yang, Haihua ^{[1
,2
]}

Yang, Wu ^{[1
,2
]}

Joyklad, Panuwat ^{[4
]}

机构：

[1] Xinjiang Agr Univ, Coll Hydraul & Civil Engn, Urumqi 830052, Peoples R China

[2] Xinjiang Key Lab Hydraul Engn Secur & Water Disas, Urumqi 830052, Peoples R China

[3] Hohai Univ, Coll Civil & Transportat Engn, Nanjing 210098, Peoples R China

[4] Srinakharinwirot Univ, Dept Civil & Environm Engn, Fac Engn, Nakhonnayok 26120, Thailand

来源：

CASE STUDIES IN CONSTRUCTION MATERIALS | 2022年 / 16卷

关键词：

Concrete; Fibres; Fibre factor; Temperature; Compressive strength; Splitting tensile strength; Flexural strength; HIGH-PERFORMANCE CONCRETE; COMPRESSIVE BEHAVIOR; FLY-ASH; STEEL; STRENGTH; PVA;

D O I：

10.1016/j.cscm.2021.e00773

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Blended fibres are being utilized in ordinary Portland cement-based materials (CBMs). The inclusion of blended fibre (a mix of several fibre types) may help CBMs perform better under fire. Fibre factor (F.F) and mechanical characteristics of blended fibre-reinforced CBMs are investigated in this research under various temperature conditions. In addition to mechanical characteristics, empirical models for strength properties in response to temperature and F.F. are established. The addition of calcite powder to blended fibres in CBMs increased mechanical strength across the board at all temperatures. However, increasing the temperature from 20 degrees C to 750 degrees C resulted in 75%, 79%, and 84% reductions in compression, split tension, and flexure strength of blended fibre-reinforced CBMs, respectively. For compression, split tension, and flexure strength, empirical models with R-2 values of 0.98, 0.92, and 0.93 were constructed, with fibre factor and temperature as the major affecting variables. Experimental data for blended fibre-reinforced CBMs revealed that empirical models predicted superior outcomes, which was brought into existence.

引用

页数：12

共 63 条

[1] Effect of Coconut Fiber Length and Content on Properties of High Strength Concrete
Ahmad, Waqas
Farooq, Syed Hassan
Usman, Muhammad
Khan, Mehran
Ahmad, Ayaz
Aslam, Fahid
Alyousef, Rayed
Alabduljabbar, Hisham
Sufian, Muhammad
[J]. MATERIALS, 2020, 13 (05)
[2] High performance concrete under elevated temperatures
Akca, Abdullah Huzeyfe
Zihnioglu, Nilufer Ozyurt
[J]. CONSTRUCTION AND BUILDING MATERIALS, 2013, 44 : 317 - 328
[3] Mechanical behaviour and fibre dispersion of hybrid steel fibre reinforced self-compacting concrete
Akcay, Burcu
Tasdemir, Mehmet Ali
[J]. CONSTRUCTION AND BUILDING MATERIALS, 2012, 28 (01) : 287 - 293
[4] The impact of the welded wire mesh as internal reinforcement on the flexural behavior of RC beams exposed to elevated temperature
Al-Rousan, Rajai Z.
[J]. CASE STUDIES IN CONSTRUCTION MATERIALS, 2021, 15
[5] Integration of CFRP strips as an internal shear reinforcement in reinforced concrete beams exposed to elevated temperature
Al-Rousan, Rajai Z.
[J]. CASE STUDIES IN CONSTRUCTION MATERIALS, 2021, 14
[6] Impact of elevated temperature and anchored grooves on the shear behavior of reinforced concrete beams strengthened with CFRP composites
Al-Rousan, Rajai Z.
[J]. CASE STUDIES IN CONSTRUCTION MATERIALS, 2021, 14
[7] [Anonymous], T/CECS 864
[8] Standard for Test Method of Ultra-High Performance Concrete
[9] High Strength Polypropylene Fibre Reinforcement Concrete at High Temperature
Aslani, Farhad
Samali, Bijan
[J]. FIRE TECHNOLOGY, 2014, 50 (05) : 1229 - 1247
[10] Thermal effect on the flexural strength of expanded clay lightweight basalt fiber reinforced concrete
Chidighikaobi, Paschal Chimeremeze
[J]. MATERIALS TODAY-PROCEEDINGS, 2019, 19 : 2467 - 2470

← 1 2 3 4 5 6 7 →