Characterization of Flexible CIGS Thin Film Solar Cells on Stainless Steel with Intrinsic ZnO Diffusion Barriers

被引：8

作者：

Kim, Chae-Woong ^{[1
,2
]}

Kim, Hye Jin ^{[1
]}

Kim, Jin Hyeok ^{[2
]}

Jeong, Chaehwan ^{[1
]}

机构：

[1] Korea Inst Ind Technol, Appl Opt & Energy R&BD Grp, 6 Cheomdan Gwagiro 208 Gil, Gwangju 500480, South Korea

[2] Chonnam Natl Univ, Dept Mat Sci & Engn, 77 Yongbong Ro, Kwangju 500757, South Korea

来源：

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY | 2016年 / 16卷 / 05期

关键词：

CIGS; Flexible; Stainless Steel; ZnO Diffusion Barrier; Solar Cells; Thin Films; GD-OES; PREFERRED ORIENTATION;

D O I：

10.1166/jnn.2016.12198

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

ZnO diffusion barrier layer was deposited by RF magnetron sputtering by using the same method as intrinsic ZnO layer. The CIGS solar cells were fabricated on stainless steel substrate. The 50 similar to 200 nm thin ZnO diffusion barriers effectively reduced the diffusion of Fe and Cr, from stainless steel substrates into the CIGS absorbers. The CIGS solar cells with ZnO diffusion barriers increased the J(sc) and FF, which resulted in an increase of cell efficiency from 5.9% up to 9.06%.

引用

页码：5124 / 5127

页数：4

共 50 条

[41] Diffusion Barriers for CdS/CdTe Solar Cells Fabricated on Flexible Substrates
Palekis, Vasilios
Singh, Kartikay
Feng, Xianjin
Morel, Don L.
Ferekides, Chris S.
2013 IEEE 39TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC), 2013, : 1156 - 1160
[42] Ultrashort pulse laser scribing of CIGS-based thin film solar cells
Giovanardi, Fabio
Bissoli, Francesco
Gilioli, Edmondo
Trevisi, Giovanna
Mazzer, Massimo
Selleri, Stefano
PROCEEDINGS OF 2020 ITALIAN CONFERENCE ON OPTICS AND PHOTONICS (ICOP), 2020,
[43] Characterization of ZnO:Ga transparent contact electrodes for microcrystalline silicon thin film solar cells
Lai, Kuang-Chieh
Liu, Chien-Chih
Lu, Chun-Hsiung
Yeh, Chih-Hung
Houng, Mau-Phon
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2010, 94 (03) : 397 - 401
[44] A single source three-stage evaporation approach to CIGS absorber layer for thin film solar cells
Xu, Congkang
Zhang, Hongwang
Parry, James
Perera, Samanthe
Long, Gen
Zeng, Hao
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2013, 117 : 357 - 362
[45] Radial n-i-p structure SiNW-based microcrystalline silicon thin-film solar cells on flexible stainless steel
Xiaobing Xie
Xiangbo Zeng
Ping Yang
Hao Li
Jingyan Li
Xiaodong Zhang
Qiming Wang
Nanoscale Research Letters, 7 (1): : 1 - 6
[46] Enhancing the efficiency of CIGS thin film solar cells by inserting novel back surface field (SnS) layer
Benabbas, S.
Heriche, H.
Rouabah, Z.
Chelali, N.
2014 NORTH AFRICAN WORKSHOP ON DIELECTRIC MATERIALS FOR PHOTOVOLTAIC SYSTEMS (NAWDMPV), 2014,
[47] The effect of temperature on resistive ZnO layers and the performance of thin film CdTe solar cells
Bittau, F.
Abbas, A.
Barth, K. L.
Bowers, J. W.
Walls, J. M.
THIN SOLID FILMS, 2017, 633 : 92 - 96
[48] Current-Voltage Characteristics of CdS/CIGS Thin Film Solar Cells: An Analytical Approach
Haque, Md. Monirul
Rahman, Md. Moshiur
Chowdhury, Md. Iqbal Bahar
PROCEEDINGS OF 2014 1ST INTERNATIONAL CONFERENCE ON NON CONVENTIONAL ENERGY (ICONCE 2014), 2014, : 24 - 27
[49] Effects of Se flux on the properties of the quaternary-sputtered CIGS thin film solar cells
Hsu, Chia-Hao
Ho, Wei-Hao
Lai, Chih-Huang
2015 IEEE 42ND PHOTOVOLTAIC SPECIALIST CONFERENCE (PVSC), 2015,
[50] All-solid, flexible solar textiles based on dye-sensitized solar cells with ZnO nanorod arrays on stainless steel wires
Chae, Youngjin
Park, Jung Tae
Koh, Jong Kwan
Kim, Jong Hak
Kim, Eunae
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2013, 178 (17): : 1117 - 1123

← 1 2 3 4 5 →