Effect of cutting parameters on surface roughness tool temperature and vibration in turning of AISI 316 Ti stainless steel

被引：5

作者：

Ay, Mustafa ^{[1
]}

机构：

[1] Firat Univ, Technol Fac, Mechatron Dept, Mfg Div, Elazig, Turkey

来源：

MATERIALS TESTING | 2019年 / 61卷 / 01期

关键词：

AISI; 316Ti; Taguchi process; ANOVA; cutting; surface roughness; tool vibration; temperature; CARBIDE INSERTS; OPTIMIZATION; FORCES; WEAR; PERFORMANCE; PREDICTION;

D O I：

10.3139/120.111289

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The effects of turning process parameters on surface roughness, tool vibration and temperature were investigated for an AISI316Ti steel. The parameters were optimized by the Taguchi method. Experiments were performed using the L-9 orthogonal array (Ti, Al) N + TiN coated carbide cutting tools in dry conditions. ANOVA and S/N ratio were used to optimize the cutting parameters. The most dominant factor affecting tool vibration and tool temperature was determined as cutting speed and the most dominant factor affecting surface roughness was feed rate. The optimum parameter combination developed by the Taguchi method was confirmed with the help of confirmation tests. As a result, with the help of optimization, the surface roughness was reduced from 1.421 mu m to 1.204 mu m and the tool vibration was reduced from 0.01454 mm to 0.00758 mm.

引用

页码：71 / 79

页数：9

共 34 条

[1]

Abhang L.B., 2010, INT J ENG SCI TECHNO, V2, P382

[2]

Abia A. I. F., 2013, PROCEDIA ENG, V63, P133

[3] Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining [J].

Abukhshim, N. A. ;

Mativenga, P. T. ;

Sheikh, M. A. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (7-8) :782-800

[4] Experimental investigation of cutting parameters influence on surface roughness and cutting forces in hard turning of X38CrMoV5-1 with CBN tool [J].

Aouici, H. ;

Yallese, M. A. ;

Belbah, A. ;

Ameur, M. F. ;

Elbah, M. .

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2013, 38 (03) :429-445

[5] Prediction of surface roughness in low speed turning of AISI316 austenitic stainless steel [J].

Assis Acayaba, Gabriel Medrado ;

de Escalona, Patricia Munoz .

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2015, 11 :62-67

[6] Investigation of cutting parameter effects on surface roughness in lathe boring operation by use of a full factorial design [J].

Beauchamp, Y ;

Thomas, M ;

Youssef, YA ;

Masounave, J .

COMPUTERS & INDUSTRIAL ENGINEERING, 1996, 31 (3-4) :645-651

[7] INVESTIGATING THE EFFECTS OF CUTTING PARAMETERS ON THE BUILT-UP-LAYER AND BUILT-UP-EDGE FORMATION DURING THE MACHINING OF AISI 310 AUSTENITIC STAINLESS STEELS [J].

Bilgin, Mehmet Burak .

MATERIALI IN TEHNOLOGIJE, 2015, 49 (05) :779-784

[8] Displacements analysis of self-excited vibrations in turning [J].

Bisu, Claudiu F. ;

Darnis, Philippe ;

Gerard, Alain ;

K'nevez, Jean-Yves .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 44 (1-2) :1-16

[9] Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool [J].

Bouacha, Khaider ;

Yallese, Mohamed Athmane ;

Mabrouki, Tarek ;

Rigal, Jean-Francois .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2010, 28 (03) :349-361

[10] The use of D-optimal design for modeling and analyzing the vibration and surface roughness in the precision turning with a diamond cutting tool [J].

Chen, Chih-Cherng ;

Chiang, Ko-Ta ;

Chou, Chih-Chung ;

Liao, Yan-Ching .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 54 (5-8) :465-478

← 1 2 3 4 →