Fretting wear properties of CrN and Cr2N coatings

被引：44
|
作者：
Tricoteaux, A [1 ]
Jouan, PY
Guerin, JD
Martinez, J
Djouadi, A
机构：
[1] Univ Valenciennes & Hainaut Cambresis, CRITT ZI Champ Abbesse, Lab Mat Avances Ceram, F-59600 Maubeuge, France
[2] Univ Valenciennes & Hainaut Cambresis Mont Houy, Lab Automat & Mecan Ind & Humaine, F-59313 Valenciennes 9, France
[3] ENSAM, Lab Bourguignon Mat & Procedes, F-71250 Cluny, France
来源：
SURFACE & COATINGS TECHNOLOGY | 2003年 / 174卷
关键词：
fretting wear properties; coatings; magnetron sputtering; CrN; Cr2N;
D O I：
10.1016/S0257-8972(03)00597-8
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Fretting wear experiments were carried out on CrN and Cr2N coatings. The chromium nitrides were deposited on 50 CrMo 4 steel substrate by reactive magnetron sputtering. The deposition conditions were optimised in order to obtain good adhesion and stoechiometric films. Scanning electron microscopy analyses were performed on the films. Fretting wear characterisations were conducted by using ball-on-flat geometries. By comparison with results obtained on the substrate, it was shown that fretting properties of Cr2N and CrN coatings are improved when grease lubricant is used in the mechanical contact. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：440 / 443
页数：4
相关论文
共 50 条
  • [21] High rate deposition of thick CrN and Cr2N coatings using modulated pulse power (MPP) magnetron sputtering
    Lin, Jianliang
    Sproul, William D.
    Moore, John J.
    Lee, Sabrina
    Myers, Sterling
    SURFACE & COATINGS TECHNOLOGY, 2011, 205 (10): : 3226 - 3234
  • [22] Structure and mechanical properties of thick Cr/Cr2N/CrN multilayer coating deposited by multi-arc ion plating
    Shan, Lei
    Wang, Yong-xin
    Li, Jin-long
    Li, He
    Lu, Xia
    Chen, Jian-min
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2015, 25 (04) : 1135 - 1143
  • [23] PROPERTIES OF ARC-EVAPORATED CRN AND (CR, AL)N COATINGS
    KNOTEK, O
    LOFFLER, F
    SCHOLL, HJ
    SURFACE & COATINGS TECHNOLOGY, 1991, 45 (1-3): : 53 - 58
  • [24] Effect of nitride (Cr2N) precipitation on the mechanical, corrosion, and wear properties of austenitic stainless steel
    Simmons, JW
    Covino, BS
    Hawk, JA
    Dunning, JS
    ISIJ INTERNATIONAL, 1996, 36 (07) : 846 - 854
  • [25] Mechanical and anti-wear properties of multi-module Cr/CrN coatings
    Szparaga, Lukasz
    Mydlowska, Katarzyna
    Gilewicz, Adam
    Ratajski, Jerzy
    INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2019, 13 (01) : 37 - 49
  • [26] Architecture of Multilayer Cr/CrN Coatings for Wear Protection in Seawater: Cr/CrN Ratio and Total Thickness
    Shan, Lei
    Wang, Yongxin
    Li, Jinlong
    Jiang, Xin
    Chen, Jianmin
    TRIBOLOGY TRANSACTIONS, 2015, 58 (05) : 914 - 923
  • [27] Comparison of wear and corrosion behaviors of Cr and CrN sputtered coatings
    Stockemer, J
    Winand, R
    Vanden Brande, P
    SURFACE & COATINGS TECHNOLOGY, 1999, 115 (2-3): : 230 - 233
  • [28] Comparison of wear and corrosion behaviors of Cr and CrN sputtered coatings
    Stockemer, J.
    Winand, R.
    Vanden Brande, P.
    Surface and Coatings Technology, 1999, 115 (2-3): : 230 - 233
  • [29] First-principles study of the stability, electronic and mechanical properties of Cr2N and CrN with the variation of Ni doping concentration
    Zhang, Zhaolu
    He, Guangyu
    Chen, Jiao
    CERAMICS INTERNATIONAL, 2021, 47 (17) : 24430 - 24437
  • [30] Nanotribology studies of Cr, Cr2N and CrN thin films using constant and ramped load nanoscratch techniques
    Wei, G
    Scharf, TW
    Zhou, JN
    Huang, F
    Weaver, ML
    Barnard, JA
    SURFACE & COATINGS TECHNOLOGY, 2001, 146 : 357 - 362
12345