Development of the arc plasma torch operation mathematical model for spheroidization of fine-dispersed powders

被引：1

作者：

Murashov, I ^{[1
]}

Frolov, V ^{[1
]}

Kadyrov, A. ^{[1
]}

机构：

[1] Peter Great St Petersburg Polytech Univ, St Petersburg, Russia

来源：

SCIENTIFIC TECHNICAL CONFERENCE ON LOW TEMPERATURE PLASMA DURING THE DEPOSITION OF FUNCTIONAL COATINGS (LTP COATINGS 2017) | 2018年 / 1058卷

关键词：

D O I：

10.1088/1742-6596/1058/1/012024

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Brief review of the fine-dispersed powders production technologies for additive laser technologies is presented in the paper. Non-stationary mathematical model of DC plasma torch operation and stationary model of the reactor operation for powder spheroidization have been developed. Air is used as the plasma-forming gas. The influence of the transporting flow and compressing gases on the characteristics of the plasma flow is analyzed. Verification of the non-stationary mathematical model of DC plasma torch operation is based on experimental studies. Radial temperature distributions obtained from the results of numerical simulation and spectral diagnostics of the plasma torch PN-V1 are presented. The results of the experimental study describing plasma flow behavior for given parameters of the fine-dispersed powders spheroidization process are presented in the paper.

引用

页数：4

共 50 条

[41] Three-dimensional and time-dependent model of the dynamic behavior of the arc in a plasma spray torch [J].

Baudry, C ;

Vardelle, A ;

Mariaux, G ;

Delalondre, C ;

Meillot, E .

Thermal Spray 2004: Advances in Technology and Application, Proceedings, 2004, :717-723

[42] Development of mathematical model with a genetic algorithm for automatic arc welding process [J].

D.T.Thao ;

I.S.Kim ;

J.W.Jeong ;

J.H.Lee ;

J.Y.Shim ;

H.H.Kim .

ActaMetallurgicaSinica(EnglishLetters), 2010, 23 (03) :230-240

[43] Development of mathematical model with a genetic algorithm for automatic arc welding process [J].

Thao, D. T. ;

Kim, I. S. ;

Jeong, J. W. ;

Lee, J. H. ;

Shim, J. Y. ;

Kim, H. H. .

ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2010, 23 (03) :230-240

[44] Development of a Mathematical Model of Dispersed Phase Outflow Using Volume of Fluid Method [J].

K. A. Mullabaev ;

S. K. Churakova .

Chemical and Petroleum Engineering, 2023, 59 :95-104

[45] The vacuum arc cathode spot and plasma jet: Physical model and mathematical description [J].

Beilis, II .

CONTRIBUTIONS TO PLASMA PHYSICS, 2003, 43 (3-4) :224-236

[46] Development of a Mathematical Model of Dispersed Phase Outflow Using Volume of Fluid Method [J].

Mullabaev, K. A. ;

Churakova, S. K. .

CHEMICAL AND PETROLEUM ENGINEERING, 2023, 59 (1-2) :95-104

[47] Model of a non-transferred arc cascaded-anode plasma torch: the two-temperature formulation [J].

Zhukovskii, Rodion ;

Chazelas, Christophe ;

Rat, Vincent ;

Vardelle, Armelle ;

Molz, Ron .

JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2022, 55 (06)

[48] Circuit-Based Mathematical Model of an Arc Heater for Control System Development [J].

Brown, Brian R. ;

Mahajan, Satish M. .

IEEE ACCESS, 2021, 9 :143085-143092

[49] Three-dimensional mathematical model for the calculation of electric-arc plasma flows [J].

Zhainakov, A ;

Urusov, RM .

HIGH TEMPERATURE, 2002, 40 (01) :9-14

[50] MATHEMATICAL-MODEL OF PLASMA-ARC FURNACE WITH PREDOMINANT RADIATION AS ELECTROHEAT CONVERTER [J].

MAKAROV, AN .

STEEL IN THE USSR, 1989, 19 (07) :321-323

← 1 2 3 4 5 →