Evaluation of 5 years' performance of VIPs in a retrofitted building facade

被引:29
作者
Johansson, Par [1 ]
Adl-Zarrabi, Bijan [1 ]
Kalagasidis, Angela Sasic [1 ]
机构
[1] Chalmers Univ Technol, Dept Civil & Environm Engn, SE-41296 Gothenburg, Sweden
基金
瑞典研究理事会;
关键词
Retrofitting; Listed building; Vacuum insulation panel; Case study; Measurement; VACUUM INSULATION PANELS; THERMAL PERFORMANCE;
D O I
10.1016/j.enbuild.2016.08.073
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The challenges to retrofit buildings urges for technologies and novel building materials to be developed. In many cases the space for additional insulation in the building envelope is limited. Vacuum insulation panels (VIPs) have a significantly lower thermal conductivity than conventional insulation materials which means less thickness is required to achieve the targeted thermal transmittance. VIPs have been used in buildings since the late 1990s and there exists experience from using them in numerous applications. Besides the higher initial cost for using VIPs in buildings there is still hesitation among architects and engineers whether this component will withstand long-term use in buildings. Therefore further investigations are needed to evaluate its long-term performance. This,paper presents experiences from a case study of a previously non-insulated wall insulated with VIPs. Measurements of the temperature and relative humidity in the wall during 5 years show no sign of deterioration of the VIPs and there is a low risk for condensation in the construction. The measurements are continuous with the aim to determine the long-term performance of VIPs in building applications. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:488 / 494
页数:7
相关论文
共 17 条
[1]  
[Anonymous], 2012, 131652012 SSEN
[2]  
Boverket, 2015, 20153BBR22 BFS
[3]  
Boverket, 2010, EN BEB TEKN EG BER R
[4]  
Boverket (Swedish National Board of Housing Building and Planning), 2009, SA MAR VAR HUS RED R
[5]   Focused ion beam (FIB) etching to investigate aluminium-coated polymer laminates subjected to heat and moisture loads [J].
Brunner, S. ;
Tharian, P. J. ;
Simmler, H. ;
Ghazi Wakili, K. .
SURFACE & COATINGS TECHNOLOGY, 2008, 202 (24) :6054-6063
[6]   Hints for an additional aging factor regarding the thermal performance of vacuum insulation panels with pyrogenic silica core [J].
Brunner, Samuel ;
Ghazi Wakili, Karim .
VACUUM, 2014, 100 :4-6
[7]   Interest and durability of multilayers: from model films to complex films [J].
Garnier, Geraldine ;
Marouani, Sofiene ;
Yrieix, Bernard ;
Pompeo, Claude ;
Chauvois, Michel ;
Flandin, Lionel ;
Brechet, Yves .
POLYMERS FOR ADVANCED TECHNOLOGIES, 2011, 22 (06) :847-856
[8]  
Heinemann U., VIP PROVE VACUUM INS
[9]  
IVA, 2012, EN SVER FLERB HIND M
[10]  
Johansson P., 2015, P 12 INT VAC INS S S