Wear behaviour analysis on aluminium alloy 7050 with reinforced SiC through taguchi approach

Aluminium alloy is the popular material in the world to produce lot of light weight parts with high strength, in additionally reinforcement is consider to these alloy is improve its strength. In this investigation consider the AA7050 aluminium alloy as a base material with reinforcement of Silicon Carbide (SiC) at various percentage level like as 0%, 4 % and 6 %. The wear of this composites are analysed through the design of experiments (Taguchi approach) for optimize the process parameters. This wear study is considered the parameters are Sliding velocity in m/s (1, 2 and 3), Sliding distance in m (1000, 1400 and 1800) and percentage of composition (0%, 43% and 6%). For this experimental investigation the sliding distance as most significant factor among three. The microstructure analysis demonstrated that there is a SiC particles which reduces wear of the samples. (c) 2020 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY -NC -ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).