共 32 条
Influence of nitrogen doping on the electrocatalytic activity of Ni-incorporated carbon nanofibers toward urea oxidation
被引:44
作者:
Barakat, Nasser A. M.
[1
,2
,3
]
Yassin, Mohamed A.
[1
,2
]
Yasin, Ahmed S.
[1
,2
]
Al-Meer, Saeed
[4
]
机构:
[1] Chonbuk Natl Univ, Organ Mat & Fiber Engn Dept, Jeonju 561756, South Korea
[2] Chonbuk Natl Univ, Bionanosyst Engn Dept, Jeonju 561756, South Korea
[3] Menia Univ, Fac Engn, Chem Engn Dept, El Minia, Egypt
[4] Qatar Univ, Cent Lab Unit, POB 2713, Doha, Qatar
关键词:
N-doped nanofibers;
Urea electrooxidation;
Nickel-decorated carbon nanofibers;
Electrospinning;
ALKALINE-SOLUTION;
HIGHLY EFFICIENT;
NICKEL ELECTRODE;
OXYGEN REDUCTION;
DOPED CARBON;
FUEL-CELLS;
ELECTROOXIDATION;
CATALYSTS;
GRAPHENE;
ANODE;
D O I:
10.1016/j.ijhydene.2017.07.076
中图分类号:
O64 [物理化学(理论化学)、化学物理学];
学科分类号:
070304 ;
081704 ;
摘要:
Overall, boosting the formation of the active NiOOH layer distinctly improves the electro catalytic activity of nickel-based materials. Moreover, due to the adsorption capacity, the carbonaceous supports improve the electrocatalytic activities of several function materials including nickel. In this manuscript, nitrogen doping is introduced as an effective strategy to enhance formation of the NiOOH active layer on the surface of nickel nanoparticles decorating carbon nanofibers. Typically, addition of urea to the nickel acetate/poly(vinyl alcohol)/water sol-gel leads to obtain nitrogen-doped and nickel-decorated carbon nano fibers after electrospinning the prepared solution and calcination the nanofiber mats under Ar at 750 degrees C. The invoked characterizations including XRD, TEM, SEM and XPS affirmed formation of smooth nitrogen-doped carbon nanofibers decorated by crystalline nickel nanoparticles. Nitrogen doping strongly enhanced the formation of NiOOH active layer on the surface of the metallic nanoparticles which distinctly improved the electrocatalytic activity toward urea oxidation. However, the electrochemical measurements indicated that the content of the urea in the initial electrospun solution should be optimized as the results showed that the best nickel surface activation as well as the maximum observed current density can be achieved when the urea content is kept at 5 wt%. Typically, the observed current densities using 1.0 M urea (in 1 M KOH) were 3.15, 29.7, 13.75, 47.55, 14.13 and 9.85 mA/cm(2) for the nanofibers obtained from electrospun solutions having 0, 1, 2, 5, 7 and 9 wt% urea, respectively. Moreover, the proposed nitrogen doping strategy leads to perform a distinguish decrease in the onset potential of the urea electrooxidation which reduces the required energy for the electrolysis process. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:21741 / 21750
页数:10
相关论文