Evaluation of the mechanical behavior of epoxy composite reinforced with Kevlar plain fabric and glass/Kevlar hybrid fabric

被引：176
|
作者：
Valenca, Silvio Leonardo [1 ]
Griza, Sandro [1 ]
de Oliveira, Vandalucia Gomes [1 ]
Sussuchi, Eliana Midori [2 ]
Carvalho de Cunha, Frederico Guilherme [3 ]
机构：
[1] Univ Fed Sergipe, Dept Mat Engn, BR-49100000 Sao Cristovao, SE, Brazil
[2] Univ Fed Sergipe, Dept Chem, BR-49100000 Sao Cristovao, SE, Brazil
[3] Univ Fed Sergipe, Dept Phys, BR-49100000 Sao Cristovao, SE, Brazil
来源：
COMPOSITES PART B-ENGINEERING | 2015年 / 70卷
关键词：
Fabrics/textiles; Polymer-matrix composites; Hybrid; Mechanical properties; LOW-VELOCITY IMPACT; AMINE CURING AGENT; WOVEN FABRICS; CARBON/EPOXY COMPOSITES; GLASS-FIBER; CURE; PERFORMANCE; DAMAGE; PROPERTY;
D O I：
10.1016/j.compositesb.2014.09.040
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, composite plates were manufactured by hand lay-up process with epoxy matrix (DGEBA) reinforced with Kevlar fiber plain fabric and Kevlar/glass hybrid fabric, using to an innovative architecture. Results of the mechanical properties of composites were obtained by tensile, bending and impact tests. These tests were performed in the parallel direction or fill directions of the warp and in a 90 direction. FTIR was used in order to verify the minimum curing time of the resin to perform the mechanical tests, and scanning electron microscopy was used to observe reinforcement and matrix fractures. Composites with Kevlar/glass hybrid structure in the reinforcing fabric showed the better results with respect to specific mechanical strength, as well as bending and impact energy. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1 / 8
页数：8
相关论文
共 50 条
  • [21] Modelling and optimization of hybrid Kevlar/glass fabric reinforced polymer composites for low-velocity impact resistant applications
    Jambhulkar, T.
    Sahu, R. K.
    FORCES IN MECHANICS, 2024, 15
  • [22] Development and characterization of kevlar and glass fibers reinforced epoxy/vinyl ester hybrid resin composites
    Ahmad, Hammad
    Shah, Atta Ur Rehman
    Afaq, S. Kamran
    Azad, Muhammad Muzammil
    Arif, Saad
    Siddiqi, Muftooh Ur Rehman
    Xie, Lijing
    POLYMER COMPOSITES, 2024, 45 (09) : 8133 - 8146
  • [23] Simulation and mechanical characterization on kevlar epoxy reinforced composite with silicon carbide filler
    Suresh, A.
    Bhargavi, P.
    Kumar, M. Kiran
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 2988 - 2995
  • [24] An experimental and numerical study of the ballistic behavior of an epoxy matrix hybrid composite reinforced with aramid fabric and fique fabric
    de Cea, Bernardo Soares Avila
    Junio, Rai Felipe Pereira
    Silva, Douglas Santos
    Garcia Filho, Fabio da Costa
    Monteiro, Sergio Neves
    Nascimento, Lucio Fabio Cassiano
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 35 : 2037 - 2054
  • [25] Influence of stacking sequence and orientation of the fabric on mechanical properties of twill Kenaf/Kevlar reinforced unsaturated polyester hybrid composites
    Sreenivas, H. T.
    Krishnamurthy, N.
    Murali, M. S.
    Arpitha, G. R.
    JOURNAL OF INDUSTRIAL TEXTILES, 2022, 51 (08) : 1330 - 1351
  • [26] Ballistic studies on Kevlar-glass fibre hybrid laminated epoxy composites
    Kumar, Saurabh S.
    Magarajan, Udayakumar
    Kumar, Selvan Dharani
    HIGH PERFORMANCE POLYMERS, 2023, 35 (02) : 142 - 152
  • [27] Studying the effect of different carbon and glass fabric stacking sequence on mechanical properties of epoxy hybrid composite laminates
    Nagaraja, K. C.
    Rajanna, S.
    Prakash, G. S.
    Koppad, Praveennath G.
    Alipour, M.
    COMPOSITES COMMUNICATIONS, 2020, 21
  • [28] Effects of Kevlar volume fraction and fabric structures on the mechanical properties of 3D orthogonal woven ramie/Kevlar reinforced poly (lactic acid) composites
    Yang, Jianxia
    Guo, Yitong
    Yao, Lan
    Ni, Qingqing
    Qiu, Yiping
    JOURNAL OF INDUSTRIAL TEXTILES, 2018, 47 (08) : 2074 - 2091
  • [29] Evaluation of tensile strength retention and service life prediction of hydrothermal aged balanced orthotropic carbon/glass and Kevlar/glass fabric reinforced polymer hybrid composites
    Muralidharan, Muniraju
    Sathishkumar, Thottyeapalayam Palanisamy
    Rajini, Nagarajan
    Navaneethakrishnan, Palanisamy
    Arun Kumar, Shanmugam
    Ismail, Sikiru Oluwarotimi
    Senthilkumar, Krishnasamy
    Siengchin, Suchart
    JOURNAL OF APPLIED POLYMER SCIENCE, 2022, 139 (06)
  • [30] Studies on mechanical and morphological behaviors of banyan/kevlar fibers reinforced MgO particulates hybrid aliphatic epoxy composite
    Raja, Thandavamoorthy
    Raja, Krishnan Venkatesh
    Reddy, Medam Indra
    Al Obaid, Sami
    Alharbi, Sulaiman Ali
    Kalam, Md Abul
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023,
12345