Evaluation of the mechanical behavior of epoxy composite reinforced with Kevlar plain fabric and glass/Kevlar hybrid fabric

被引：181

作者：

Valenca, Silvio Leonardo ^{[1
]}

Griza, Sandro ^{[1
]}

de Oliveira, Vandalucia Gomes ^{[1
]}

Sussuchi, Eliana Midori ^{[2
]}

Carvalho de Cunha, Frederico Guilherme ^{[3
]}

机构：

[1] Univ Fed Sergipe, Dept Mat Engn, BR-49100000 Sao Cristovao, SE, Brazil

[2] Univ Fed Sergipe, Dept Chem, BR-49100000 Sao Cristovao, SE, Brazil

[3] Univ Fed Sergipe, Dept Phys, BR-49100000 Sao Cristovao, SE, Brazil

来源：

COMPOSITES PART B-ENGINEERING | 2015年 / 70卷

关键词：

Fabrics/textiles; Polymer-matrix composites; Hybrid; Mechanical properties; LOW-VELOCITY IMPACT; AMINE CURING AGENT; WOVEN FABRICS; CARBON/EPOXY COMPOSITES; GLASS-FIBER; CURE; PERFORMANCE; DAMAGE; PROPERTY;

D O I：

10.1016/j.compositesb.2014.09.040

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, composite plates were manufactured by hand lay-up process with epoxy matrix (DGEBA) reinforced with Kevlar fiber plain fabric and Kevlar/glass hybrid fabric, using to an innovative architecture. Results of the mechanical properties of composites were obtained by tensile, bending and impact tests. These tests were performed in the parallel direction or fill directions of the warp and in a 90 direction. FTIR was used in order to verify the minimum curing time of the resin to perform the mechanical tests, and scanning electron microscopy was used to observe reinforcement and matrix fractures. Composites with Kevlar/glass hybrid structure in the reinforcing fabric showed the better results with respect to specific mechanical strength, as well as bending and impact energy. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：1 / 8

页数：8

共 36 条

[31] Two-step surface treatment of 3D braided carbon/Kevlar hybrid fabric and influence on mechanical performance of its composites [J].

Wan, Y. Z. ;

Lian, J. J. ;

Huang, Y. ;

Wang, Y. L. ;

Chen, G. C. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 429 (1-2) :304-311

[32] Size effects in unnotched tensile strength of unidirectional and quasi-isotropic carbon/epoxy composites [J].

Wisnom, M. R. ;

Khan, B. ;

Hallett, S. R. .

COMPOSITE STRUCTURES, 2008, 84 (01) :21-28

[33]

Wooa Sung-Choong, 2014, COMPOSITES B, V60, P125

[34] Geometrical modelling of 3D woven reinforcements for polymer composites: Prediction of fabric permeability and composite mechanical properties [J].

Zeng, Xuesen ;

Brown, Louise P. ;

Endruweit, Andreas ;

Matveev, Mikhail ;

Long, Andrew C. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2014, 56 :150-160

[35] Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures [J].

Zhang, Jin ;

Chaisombat, Khunlavit ;

He, Shuai ;

Wang, Chun H. .

MATERIALS & DESIGN, 2012, 36 :75-80

[36] Influence of yarn gripping on the ballistic performance of woven fabrics from ultra-high molecular weight polyethylene fibre [J].

Zhou, Yi ;

Chen, Xiaogang ;

Wells, Garry .

COMPOSITES PART B-ENGINEERING, 2014, 62 :198-204

← 1 2 3 4 →