Dissipative moment resisting steel frames with slender cross-section for regions with moderate seismicity

被引:0
作者
Degee, Herve [1 ]
Hoffmeister, Benno [2 ]
Duchene, Yves [3 ]
机构
[1] Hasselt Univ, Fac Engn Technol, Campus Diepenbeek,Agoralaan Gebouw H, B-3590 Diepenbeek, Belgium
[2] Rhein Westfal TH Aachen, Inst Stahlbau, Mies van der Rohe Str 1, D-52074 Aachen, Germany
[3] Design Off Greisch, Allee Noisetiers 25, B-4031 Liege, Belgium
关键词
steel; composite; moment resisting frames; slender cross-sections; dissipation; seismicity; behaviour factor;
D O I
10.1002/stab.201900112
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Specific investigations have been carried out regarding typical beam profiles commonly used for steel and composite frames. In a first stage, experimental tests on class-3 and class-4 built up steel profiles and composite beam-to-column nodes were performed. The measurement results were evaluated with regard to the development of the hysteretic behavior with particular emphasis on the cyclic degradation. These test results have been used as reference for the calibration and validation of numerical models aiming at extending the scope of the experimental outcomes through appropriate parametric variations regarding the behavior of nodal connections as well as towards the global analysis and behaviour of structures made of class 3 and 4 profiles. Based on the outcomes of these investigations, practical design recommendations were finally derived for moment resisting frames located in low and moderate seismicity regions and proposed for implementation in the next generation of Eurocode 8.
引用
收藏
页码:38 / 48
页数:11
相关论文
共 6 条
[1]  
[Anonymous], 2009, 199812004AC2009 EN
[2]  
[Anonymous], 1986, Recommended testing procedure for assessing the behaviour of structural steel elements under cyclic loads
[3]  
Degee H., 2018, 12 INT C ADV STEEL C
[4]  
Degee H., 2019, SECED 2019 C EARTHQ
[5]  
Degee H., 2018, MEAKADO DESIGN STEEL
[6]   Loading protocols for European regions of low to moderate seismicity [J].
Mergos, Panagiotis E. ;
Beyer, Katrin .
BULLETIN OF EARTHQUAKE ENGINEERING, 2014, 12 (06) :2507-2530