INFLUENCE OF THE TOOL RAKE ANGLE ON RESIDUAL STRESSES IN CASE OF ORTHOGONAL HARD TURNING OF AISI 5115 CASE HARDENED STEEL

被引：0
|
作者：
Szabo, G. [1 ]
机构：
[1] Univ Miskolc, Dept Prod Engn, H-3515 Miskolc, Hungary
来源：
13TH INTERNATIONAL CONFERENCE ON TOOLS | 2012年
关键词：
hard turning; tool rake angle; residual stress;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
With the technological conditions and cutting edge geometry chosen acceptably, the mechanical properties of the machined surface layer can be improved significantly. The appropriate cutting edge geometry plays an important role in the hard turning technology. The paper is about the analysis of the state of residual stress depending on the change of rake angle in orthogonal hard turning of case hardened steel signed by AISI 5115.
引用
收藏
页码：77 / 82
页数：6
相关论文
共 50 条
  • [41] Effect of cutting parameters on surface roughness using orthogonal array in hard turning of AISI 1045 steel with YT5 tool
    Zeqing Xiao
    Xiaoping Liao
    Zhenhong Long
    Ming Li
    The International Journal of Advanced Manufacturing Technology, 2017, 93 : 273 - 282
  • [42] Integrating Multivariate Statistical Analysis Into Six Sigma DMAIC Projects: A Case Study on AISI 52100 Hardened Steel Turning
    Peruchi, Rogerio Santana
    Rotela Junior, Paulo
    Brito, Tarcisio G.
    Paiva, Anderson P.
    Balestrassi, Pedro P.
    Mendes Araujo, Lavinia M.
    IEEE ACCESS, 2020, 8 : 34246 - 34255
  • [43] Influence of Cutting Speed and Feed Rate on the Wear of an S-Type Mixed Ceramic Tool in Turning of AISI 4140 Hardened Steel
    Nicolodi, Jeferson H. W.
    Consalter, Luiz A.
    Duran, Orlando
    Souza, Andre J.
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2019, 26 (04): : 913 - 919
  • [44] Influence of cutting parameters on tool wear and surface roughness in hard turning of AISI H11 tool steel using ceramic tools
    Saini, Sanjeev
    Ahuja, Inderpreet Singh
    Sharma, Vishal S.
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2012, 13 (08) : 1295 - 1302
  • [45] The influence of process variables on machinability of hardened tool steel during the hard turning under eco-friendly cooling environment
    Kannappan, Venkatesh
    Thiyagarajan, Senthilvelan
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 781 - +
  • [46] Influence of cutting parameters on tool wear and surface roughness in hard turning of AISI H11 tool steel using ceramic tools
    Sanjeev Saini
    Inderpreet Singh Ahuja
    Vishal S. Sharma
    International Journal of Precision Engineering and Manufacturing, 2012, 13 : 1295 - 1302
  • [47] Experimental study of residual stresses in laser clad AISI P20 tool steel on pre-hardened wrought P20 substrate
    Chen, J. -Y
    Conlon, K.
    Xue, L.
    Rogge, R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (27-28): : 7265 - 7273
  • [48] Thermomechanical Modeling and Numerical Simulation of Orthogonal Turning of 42CrMo4 Steel: Case of Workpiece/Tool Studies
    Brahim, Boujemaa Hadj
    Dahmani, Lotfi
    Nasser, Mohamed
    Attyaoui, Slimen
    Vorob'ev, Aleksandr A.
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2024,
  • [49] A hybrid finite element method-artificial neural network approach for predicting residual stresses and the optimal cutting conditions during hard turning of AISI 52100 bearing steel
    Umbrello, D.
    Ambrogio, G.
    Filice, L.
    Shivpuri, R.
    MATERIALS & DESIGN, 2008, 29 (04): : 873 - 883
  • [50] Comparative Performance In Hard Turning Of AISI 1015 Steel With Carbide Insert Using Orthogonal Array Design And Grey Relational Analysis Under Spray Impingement Cooling And Dry Environment: A Case Study
    Mishra, Purna Chandra
    Das, Dipti Kanta
    Sahu, Susant Kumar
    INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2014, 4 (03) : 1 - 32
12345