INFLUENCE OF THE TOOL RAKE ANGLE ON RESIDUAL STRESSES IN CASE OF ORTHOGONAL HARD TURNING OF AISI 5115 CASE HARDENED STEEL

被引：0
|
作者：
Szabo, G. [1 ]
机构：
[1] Univ Miskolc, Dept Prod Engn, H-3515 Miskolc, Hungary
来源：
13TH INTERNATIONAL CONFERENCE ON TOOLS | 2012年
关键词：
hard turning; tool rake angle; residual stress;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
With the technological conditions and cutting edge geometry chosen acceptably, the mechanical properties of the machined surface layer can be improved significantly. The appropriate cutting edge geometry plays an important role in the hard turning technology. The paper is about the analysis of the state of residual stress depending on the change of rake angle in orthogonal hard turning of case hardened steel signed by AISI 5115.
引用
收藏
页码：77 / 82
页数：6
相关论文
共 50 条
  • [21] The influence of cutting parameters on residual stresses and surface topography during hard turning of 18MnCr5 case carburised steel
    Gunnberg, Fredrik
    Escursell, Marcel
    Jacobson, Michael
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 174 (1-3) : 82 - 90
  • [22] Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel
    Klimenko, S. An.
    Manokhin, A. S.
    Klimenko, S. A.
    Journal of Superhard Materials, 2015, 37 (02) : 125 - 131
  • [23] Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel
    S. An. Klimenko
    A. S. Manokhin
    S. A. Klimenko
    Journal of Superhard Materials, 2015, 37 : 125 - 131
  • [24] Influence of surface condition on the fatigue behaviour of specimens made of a SAE 5115 case-hardened steel
    Laue, S
    Bomas, H
    Hoffmann, F
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2006, 29 (03) : 229 - 241
  • [25] Chip formation mechanism in dry hard high-speed orthogonal turning of hardened AISI D2 tool steel with different hardness levels
    Linhu Tang
    Jun Yin
    Yongji Sun
    Hao Shen
    Chengxiu Gao
    The International Journal of Advanced Manufacturing Technology, 2017, 93 : 2341 - 2356
  • [26] Chip formation mechanism in dry hard high-speed orthogonal turning of hardened AISI D2 tool steel with different hardness levels
    Tang, Linhu
    Yin, Jun
    Sun, Yongji
    Shen, Hao
    Gao, Chengxiu
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (5-8): : 2341 - 2356
  • [27] Chip formation mechanism in dry hard high-speed orthogonal turning of hardened AISI D2 tool steel with different hardness levels
    Tang, Linhu
    Yin, Jun
    Sun, Yongji
    Shen, Hao
    Gao, Chengxiu
    International Journal of Advanced Manufacturing Technology, 2017, 93 (5-8): : 2341 - 2356
  • [28] Surface Integrity Functional Analysis in Hard Turning AISI 8620 Case Hardened Steel through 3D Topographical Measurement
    Farias, A.
    Delijaicov, S.
    Stipkovic Filho, M.
    Batalha, G. F.
    MODELLING OF MACHINING OPERATIONS, 2011, 223 : 483 - +
  • [29] INFLUENCE OF RESIDUAL AUSTENITE ON CERTAIN PROPERTIES OF CASE-HARDENED STEEL
    WYSZKOWS.J
    PRIEGNIT.H
    GOZDZIK, E
    RATKIEWI.A
    REVUE DE METALLURGIE, 1971, 68 (06): : 411 - &
  • [30] Simulation of the influence of cutting speed and feed rate on tool life in hard turning of AISI 4140 steel
    Paengchit, Phacharadit
    Saikaew, Charnnarong
    MATERIALS SCIENCE-POLAND, 2023, 41 (02) : 311 - 324
12345