INFLUENCE OF THE TOOL RAKE ANGLE ON RESIDUAL STRESSES IN CASE OF ORTHOGONAL HARD TURNING OF AISI 5115 CASE HARDENED STEEL

被引：0
作者：
Szabo, G. [1 ]
机构：
[1] Univ Miskolc, Dept Prod Engn, H-3515 Miskolc, Hungary
来源：
13TH INTERNATIONAL CONFERENCE ON TOOLS | 2012年
关键词：
hard turning; tool rake angle; residual stress;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
With the technological conditions and cutting edge geometry chosen acceptably, the mechanical properties of the machined surface layer can be improved significantly. The appropriate cutting edge geometry plays an important role in the hard turning technology. The paper is about the analysis of the state of residual stress depending on the change of rake angle in orthogonal hard turning of case hardened steel signed by AISI 5115.
引用
收藏
页码：77 / 82
页数：6
相关论文
共 21 条
  • [1] The Influence of Tool Rake Surface Geometry on the Hard Turning Process of AISI52100 Hardened Steel
    Xu, Hanzhong
    Zhou, Honggen
    Ma, Zhengyu
    Dai, Lei
    Jing, Xuwen
    Li, Guochao
    Sun, Yujing
    MATERIALS, 2019, 12 (19)
  • [2] Investigation of Residual Stresses in Case of Hard Turning of Case Hardened 16MnCr5 Steel
    Szabo, Gergely
    Kundrak, Janos
    PRECISION MACHINING VII, 2014, 581 : 501 - 504
  • [3] Surface integrity and residual stresses analysis by strain gages after hard turning process of case hardened steel aisi 8620
    Farias, A.
    Delijaicov, S.
    de Mello, J. D. B.
    Stipkovic Filho, M.
    Batalha, G. F.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2010, 83-86 : 718 - +
  • [4] The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turning
    Dahlman, P
    Gunnberg, F
    Jacobson, M
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 147 (02) : 181 - 184
  • [5] Modelling the effects of cutting parameters on residual stresses in hard turning of AISI H11 tool steel
    Sanjeev Saini
    Inderpreet Singh Ahuja
    Vishal S. Sharma
    The International Journal of Advanced Manufacturing Technology, 2013, 65 : 667 - 678
  • [6] Modelling the effects of cutting parameters on residual stresses in hard turning of AISI H11 tool steel
    Saini, Sanjeev
    Ahuja, Inderpreet Singh
    Sharma, Vishal S.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 65 (5-8) : 667 - 678
  • [7] Cutting Tool Edge Temperature in Finish Hard Turning of Case Hardened Steel
    Tanaka, Ryutaro
    Morishita, Hiroki
    Lin, Yongchuan
    Hosokawa, Akira
    Ueda, Takashi
    Furumoto, Tatsuaki
    PROGRESS OF MACHINING TECHNOLOGY, 2009, 407-408 : 538 - 541
  • [8] Experimental investigation on variation of machined residual stresses by turning and grinding of hardened AISI 1053 steel
    Joseph J. Martell
    C. Richard Liu
    Jing Shi
    The International Journal of Advanced Manufacturing Technology, 2014, 74 : 1381 - 1392
  • [9] Experimental investigation on variation of machined residual stresses by turning and grinding of hardened AISI 1053 steel
    Martell, Joseph J.
    Liu, C. Richard
    Shi, Jing
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 74 (9-12) : 1381 - 1392
  • [10] Tool condition monitoring during hard turning of AISI 52100 Steel: A case study
    Panda, Amlana
    Sahoo, Ashok Kumar
    Panigrahi, Isham
    Kumar, Ramanuj
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 18585 - 18592
123