Analysis and Modeling of Heat Flux into the Tool in Abrasive Circular Cutting of Unidirectional CFRP

被引:9
作者
Hintze, Wolfgang [1 ]
Klingelhoeller, Christian [2 ]
机构
[1] Hamburg Univ Technol TUHH, IPMT, Hamburg, Germany
[2] ModuleWorks GmbH, Aachen, Germany
来源
1ST CIRP CONFERENCE ON COMPOSITE MATERIALS PARTS MANUFACTURING (CIRP CCMPM 2017) | 2017年 / 66卷
关键词
Temperature; Composite; Modeling; Grinding; COMPOSITES;
D O I
10.1016/j.procir.2017.03.305
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
For edge trimming of slightly curved thin walled CFRP parts dry circular cutting is a promising alternative. However, a high fraction of the cutting energy is converted into heat. The study focuses on the determination of the amount of heat dissipated by the tool in circular cutting of unidirectional CFRP with epoxy matrix. An inverse heat conduction model is developed and solved for a set of temperature profiles measured on the tool surface with an infrared camera. It was found, how the heat dissipation by the diamond abrasive cut-off wheel is affected by fiber orientation, cutting speed, feed velocity and immersion depth of the wheel. The projected cutting area normal to the fiber direction turned out to be crucial for heat dissipation. The results of numerical simulations and experiments indicate, that tool temperatures in dry circular cutting do not exceed temperature limits of CFRP present in dry end milling. The developed heat flux model allows for optimization of dry CFRP abrasive circular cutting processes. It forms a module for future workpiece temperature assessment and thermo-mechanical process simulation. (C) 2017 The Authors. Published by Elsevier B.V.
引用
收藏
页码:210 / 214
页数:5
相关论文
共 25 条
[1]  
[Anonymous], 2013, P 14 CIRP C MOD MACH, V8, P443, DOI [10.1016/j.procir.2013.06.1311, DOI 10.1016/J.PROCIR.2013.06.1311]
[2]  
Arisawa H., 2012, Mitsubishi Heavy Industries Technical Review, V49, P3
[3]   Advances in modeling and simulation of grinding processes [J].
Brinksmeier, E. ;
Aurich, J. C. ;
Govekar, E. ;
Heinzel, C. ;
Hoffmeister, H. -W. ;
Klocke, F. ;
Peters, J. ;
Rentsch, R. ;
Stephenson, D. J. ;
Uhlmann, E. ;
Weinert, K. ;
Wittmann, M. .
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (02) :667-696
[4]  
Cardone Gennaro., 1997, International Journal of Rotating Machinery, V3, P1, DOI DOI 10.1155/S1023621X97000018
[5]   Edge trimming of graphite/epoxy with diamond abrasive cutters [J].
Colligan, K ;
Ramulu, M .
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1999, 121 (04) :647-655
[6]   Theoretical Analysis of Grinding Temperature Field for Carbon Fiber Reinforced Plastics [J].
Gao, H. ;
Ma, H. L. ;
Bao, Y. J. ;
Yuan, H. P. ;
Kang, R. K. .
ADVANCES IN ABRASIVE TECHNOLOGY XIII, 2010, 126-128 :52-57
[7]  
Hahn DavidW., 2012, Heat Conduction, V3, P1, DOI DOI 10.1002/9781118411285.CH1
[8]   Curved sawing of thin lightweight components [J].
Hintze W. ;
Klingelhöller C. ;
Langhof O. .
Production Engineering, 2014, 9 (01) :51-59
[9]  
Hintze W., 2013, LECT NOTES PRODUCTIO
[10]  
Hohensee V., 1990, MAGAZIN NEUE WERKSTO, V1, P13