The finite element model of non-isothermal semi-solid fluid flow

被引：26

作者：

Petera, J ^{[1
]}

Kotynia, M ^{[1
]}

机构：

[1] Tech Univ Lodz, Fac Proc & Environm Engn, PL-93005 Lodz, Poland

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2004年 / 47卷 / 6-7期

关键词：

D O I：

10.1016/j.ijheatmasstransfer.2003.09.019

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A new general non-isothermal theological model of metal alloys in the thixoforming processes has been derived. The model uses the two-phase approach to flow description with two momentum conservation equations buckled by common pressure and interface drag force. The thixotropy phenomena occurring in the globular structure of the alloy, is modelled by means of an extra kinetic equation describing agglomeration degree. The non-isothermal processes are governed by the thermal energy conservation equation coupled with a temperature-enthalpy and solid fraction relationship. The time evolution of the solid fraction is described by the mass conservation equation for the solid phase with a source term based on the Sheil equation. The mathematical model has been implemented in an original efficient finite element algorithm, which is tested against very well known benchmark problems as well as used in a real 3-D simulation of a thixoforming process. (C) 2003 Elsevier Ltd. All rights reserved.

引用

页码：1483 / 1498

页数：16

共 34 条

[1] Mathematical and computational modeling of die filling in semisolid metal processing [J].

Alexandrou, A ;

Bardinet, F ;

Loué, W .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 96 (1-3) :59-72

[2]

ALEXANDROU AN, 1998, P 5 INT C SEM SOL PR

[3]

ALEXANNDROU AN, 2002, P 4 S2P 2002 INT C S

[4]

Astarita G., 1974, Principles of Non-Newtonian Fluid Mechanics

[5] MODELING OF MULTIDIMENSIONAL SOLIDIFICATION OF AN ALLOY [J].

BASU, B ;

SEKHAR, JA .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1989, 20 (09) :1833-1845

[6]

BRENT AD, 1988, NUMER HEAT TRANSFER, V13, P297, DOI 10.1080/10407788808913615

[7] Finite element analysis of the combined extrusion of semi-solid material and its experimental verification [J].

Choi, JC ;

Park, JH ;

Kim, BM .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 105 (1-2) :49-54

[8] COMPARISON OF FINITE-ELEMENT TECHNIQUES FOR SOLIDIFICATION PROBLEMS [J].

DALHUIJSEN, AJ ;

SEGAL, A .

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 1986, 23 (10) :1807-1829

[9]

Dantzig JA, 1999, CRYST RES TECHNOL, V34, P417, DOI 10.1002/(SICI)1521-4079(199904)34:4<417::AID-CRAT417>3.0.CO

[10]

2-M

← 1 2 3 4 →